[hpsdr] Fwd: Transverter setup for Atlas boards system needed

[Helmut]

Hi Ted,

there is no specific setting for Atlas based boards:

You only have to enter the frequency of your transverter's LO, e.g. 116 MHz,
if you want to run a 2m -TRV in the 10m - band (IF = 144 - 116 MHz). BTW you
can use the entire Nyquist - zone (HF bands up to 60 MHz) as intermediate
frequency acc. to the LO frequency of the TRV. Keep the drive TX-level below
the specified TRV-TX-input level!

73, Helmut, DC6NY


-----Ursprüngliche Nachricht-----
Von: Hpsdr [mailto:hpsdr-bounces at lists.openhpsdr.org] Im Auftrag von Ted
Gesendet: Donnerstag, 15. August 2019 05:35
An: hpsdr at openhpsdr.org
Betreff: [hpsdr] Fwd: Transverter setup for Atlas boards system needed

***** High Performance Software Defined Radio Discussion List *****



---
Diese E-Mail wurde von AVG auf Viren geprüft.
http://www.avg.com