[hpsdr] HPSDR(Mercury, Pannylane, adn Metiz) and PowerSDR version

[Riho B., ES7AAZ]

Hi Tokio and all,

BTW, you can find very cool skins for PowerSDR mRX on the WA1AEX website
http://www.w1aex.com/hpsdr/hpsdr.html
You can find perfectly tuned SSB and AM transmit profiles there as well
http://www.w1aex.com/anan/profiles/tx_profiles.html

Kontakt Tokio (<endotokio at gmail.com>) kirjutas kuupäeval L, 16. oktoober
2021 kell 11:22:

> ***** High Performance Software Defined Radio Discussion List *****
>
> Hi All,
>
> Last year I found mails relating to Mercury and PowerSDR by some guys on
> the list.
>
> Retrospectively I would like to use HPSDR(Mercury, Panylane, and Metiz)
> for CW, FT8, as well as PSK.
>
> I pulled the radio from the shelf and set up PowerSDR. Receiving seems to
> be fine, but for transmission I have a problem; Drive slider doesn't work
> properly. Than means the control of TX power is not just what I expect by
> the slider. The power remains the same until the slider reaches zero, at
> this point the power output is zero. I measured it using my oscilloscope.
>
> The version of each board are shown in the attached picture as well as
> PowerSDR. Is there a need to change the firmware version of my boards? Your
> help is much appreciated.
>
> 73,
> Tokio
> JA1CCA
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/



-- 
*73,*
*Riho ES7AAZ*
*www.qrz.com/ES7AAZ <https://www.qrz.com/db/ES7AAZ>*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20211018/1e415183/attachment.html>