[hpsdr] Hpsdr Digest, Vol 200, Issue 3 HARDWARE NOT RECOGNIZED.

Thu Dec 1 09:39:00 PST 2022

Hi Alex.

Fine that you solved the problem. And there is always something 
happening that it is difficult to find any reason for.

73, Kjell

Den 01.12.2022 01:39, skrev wbr at verizon.net:
> ***** High Performance Software Defined Radio Discussion List *****
>
>
> Kjell,
>
> I do appreciate you responding to my query to this reflector.  I 
> finally got it figured out.   For some reason the second ethernet port 
> on my mobo was (is) at
> fault.  I could not figure out how to make it work.  So, I finally 
> tried plugging into my gigabit router from the other  mobo ethernet 
> port.  It connected.
> Metis Ver. 1.7  (IP: 192.168.1.181)
> Mercury (Ver: ?)
> Penelope (Ver:?)
> Alex
> Excalibur  (GPS OCXO)
> HPSDR Ver: 3.4.9
>
> I'm a happy camper again.
>
> I sure would like to know how and why the program got deleted off my 
> computer.
>
> Thank You a bunch for responding.  I hope you have a very happy 
> Holiday season.
>
> 73, Bill, WF4R
> -----Original Message-----
> From: hpsdr-request at lists.openhpsdr.org
> To: hpsdr at lists.openhpsdr.org
> Sent: Tue, Nov 29, 2022 4:03 pm
> Subject: Hpsdr Digest, Vol 200, Issue 3
>
> Send Hpsdr mailing list submissions to
> hpsdr at lists.openhpsdr.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> or, via email, send a message with subject or body 'help' to
> hpsdr-request at lists.openhpsdr.org
>
> You can reach the person managing the list at
> hpsdr-owner at lists.openhpsdr.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Hpsdr digest..."
> PLEASE change your subject line in any replies to this digest to 
> reflect the actual subject!!!  Also please trim quotes of previous 
> messages to a minimum necessary to maintain context. Remember: if you 
> post using fancy rtf or html, it will not be read by Digest recipients 
> without a big effort. We all thank you for this thoughtfullness.
> Today's Topics:
>
>   1. Re: Is this list dead? (Kjell Karlsen)
>   2. SDR (iw8rvq at tiscali.it)
>   3. Transmit audio processing (Jim Sanford)
> Hi Bill.
> The list should still be working but the activity is very low.
> Can you tell what version of Windows you are using. And what do you 
> mean with ETIS IP address. What hardware are you running, Hermes, or 
> the original Atlas bus with Mercury and Pennelope? And are you still 
> using PowerSDR or have you updated to Thetis and eventually to Protocol 2?
> 73, Kjell, LA2NI
> Den 26.11.2022 18:17, skrev wbr at verizon.net <mailto:wbr at verizon.net>:
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>>
>> I realize the TAPR HPSDR project is getting long in tooth, but it is 
>> still (was) a great sdr.
>> I need help with why the ETIS IP address does not seem to recognize 
>> the hardware.
>>
>> Is there anyone that my shed some light as to why the software will 
>> not see ETIS?
>> I've tried changing the IP address without success.
>>
>> There seems to be four IP ports in the setup.
>> Please, what am I missing?
>>
>> 73, Bill, wf4r
>>
>> _______________________________________________
>> HPSDR Discussion List
>> To post msg:hpsdr at openhpsdr.org  <mailto:hpsdr at openhpsdr.org>
>> Subscription help:http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org  <http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org>
>> HPSDR web page:http://openhpsdr.org  <http://openhpsdr.org/>
>> Archives:http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/  <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/>
> devi far intervenire il  brouser per indirizzo ip se si tratta i 
> redpitaya
>
>
>
> VOUCHER CONNETTIVITÀ per P.IVA e PMI: internet a canone 0 per 48 mesi. 
> ATTIVA ORA
> https://casa.tiscali.it/promo/?u=https://promozioni.tiscali.it/voucher_business/ 
> <https://casa.tiscali.it/promo/?u=https://promozioni.tiscali.it/voucher_business/?r=TS00000A00025&dm=link&p=tiscali&utm_source=tiscali&utm_medium=link&utm_campaign=voucherbusiness&wt_np=tiscali.link.footermail.voucherbusiness.btb..>
>
> All:
>
> A few years back, There was an upgrade to OpenHPSDRmRX which
> incorporated all kinds of neat audio processing in the transmit audio
> chain.  There was a tutorial published on how to set that up.  I did
> that on my first SDR, using an Icom desk mike, and it worked great.  I
> thought I saved and printed those instructions, but can't find.
>
> I now wish to do the same on a second SDR, which will be installed
> remotely and virtualized.  I can't find the very detailed instructions
> on using the transmit audio processing.  Can somebody please point me to
> those instructions?
>
> Thanks & 73,
>
> Jim
>
> wb4gcs at amsat.org
>
>
>
> -- 
> This email has been checked for viruses by Avast antivirus software.
> www.avast.com
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: 
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
> _______________________________________________
> HPSDR Discussion List
> To post msg:hpsdr at openhpsdr.org
> Subscription help:http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page:http://openhpsdr.org
> Archives:http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20221201/df100d09/attachment.htm>