<div>It was a nice warm today and the skunks are out tonight so I thought I would ask. </div> <div>What is the front end of this FPGA machine you guys are building. I just built a double balanced tayloe converter for my Racal RA6830 and have been testing for a week or so.</div> <div>The close in dynamic range is very good 87 dB at 2.5 kHz.spacing, using a stock dell sound card. 94 dB at 20 KHz spacing. I'm a bit old fashion thinking a roofing filter IF would be better ahead of a DC RX but keeping an open mind.</div> <div>I would love to have a box that does not be connected to bill gates slugware to function. Just use the tube for a spectrum display.</div> <div> </div> <div>keep up the good work the hardware pukes are lurking. <BR><BR><B><I>hpsdr-request@hpsdr.org</I></B> wrote:</div> <BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">Send hpsdr mailing list submissions to<BR>hpsdr@hpsdr.org<BR><BR>To subscribe
or unsubscribe via the World Wide Web, visit<BR>http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org<BR>or, via email, send a message with subject or body 'help' to<BR>hpsdr-request@hpsdr.org<BR><BR>You can reach the person managing the list at<BR>hpsdr-owner@hpsdr.org<BR><BR>When replying, please edit your Subject line so it is more specific<BR>than "Re: Contents of hpsdr digest..."<BR><BR><BR>PLEASE change your subject line in any replies to this digest to reflect the actual subject!!! We all thank you for this thoughtfullness.<BR><BR>Today's Topics:<BR><BR>1. Re: [ATLAS] Gerbers posted... (H. Gruchow)<BR>2. [ATLAS] File update 10 March 2006 (Philip Covington)<BR>3. Re: [ATLAS] Gerbers posted... (Philip Covington)<BR>4. Re: [ATLAS] Gerbers posted... (Eric Ellison)<BR>5. Re: [ATLAS] Gerbers posted... (Eric Ellison)<BR>6. Re: [ATLAS] File update 10 March 2006 (Eric Ellison)<BR>7. Update? (Eric Ellison)<BR>8. Re: [ATLAS] Gerbers posted... (H. Gruchow)<BR>9. Re: [ATLAS] Gerbers
posted... (Eric Ellison)<BR>10. Teamspeak Audio - 03-11-06 - Dayton etc. (Eric Ellison)<BR><BR><BR>----------------------------------------------------------------------<BR><BR>Message: 1<BR>Date: Fri, 10 Mar 2006 22:49:32 +0100<BR>From: "H. Gruchow" <HORST@NEEDLES.DE><BR>Subject: Re: [hpsdr] [ATLAS] Gerbers posted...<BR>To: hpsdr@hpsdr.org<BR>Message-ID: <4411F46C.9080509@needles.de><BR>Content-Type: text/plain; charset=ISO-8859-15; format=flowed<BR><BR>Hello<BR><BR>just want to introduce myself to the group and say 'hello world' to <BR>everybody. This is an outstandingly interesting project and I follow the <BR>discussions with more and more exitement. Software defined radio has <BR>brought my interest back to ham radio a few months ago and since then I <BR>am collecting every information I can get hands on.<BR>Unfortunately I cannot contribute much to the project other then <BR>clapping hands from time to time because I am not a professional in <BR>electronics like you
folks are. And I am lacking time, that's another <BR>thing. But I am able to solder SMDs!<BR><BR>I just had the same problems with the Kicad Gerber viewer under <BR>WindowsXP. You just can see only full copper layers with some pads here <BR>and there. I searched the web and found a free Gerber viewer which can <BR>be downloaded after doing some registration stuff.<BR><BR>ViewMate from PentaLogix<BR><BR>http://www.pentalogix.com/Download/download.html<BR><BR>Only a little contribution but maybe it helps somebody out.<BR><BR>Most of the time I will stay in the background admiring the creative <BR>people in this group but you can be sure that every information is <BR>soaked up with great interest.<BR><BR>73<BR>Horst<BR>DL6KBF<BR><BR><BR>------------------------------<BR><BR>Message: 2<BR>Date: Fri, 10 Mar 2006 17:12:15 -0500<BR>From: "Philip Covington" <P.COVINGTON@GMAIL.COM><BR>Subject: [hpsdr] [ATLAS] File update 10 March 2006<BR>To: "High Performance Software Defined Radio
Discussion List"<BR><HPSDR@HPSDR.ORG><BR>Message-ID:<BR><32aa05ee0603101412p6048ec6bp6d4c2724ec7a1ae2@mail.gmail.com><BR>Content-Type: text/plain; charset=ISO-8859-1<BR><BR>Hi group,<BR><BR><HTTP: ATLAS HPSDR www.philcovington.com /><BR><BR>contains the updated files.<BR><BR>I deleted the PDFs of the gerbers since they are causing confusion. <BR>If you don't already have a gerber viewer, please see the message<BR>about Viewmate if you want to view the gerbers.<BR><BR>I also posted the PADs files for the Atlas. You can get an evaluation<BR>version of PADs from:<BR><BR><HTTP: pads_eval.cfm pads pcb products www.mentor.com><BR><BR>I added thermals to the DIN41612 and ATX connectors as requested by<BR>Helmut. I posted my reasons for wanting to avoid thermals on the top<BR>layer, but upon further consideration I went ahead and added them<BR>since people's soldering skills and capabilities vary widely. It is<BR>(probably?) more important to make it easy to construct than to
worry<BR>too much about the missing ground plane. Any further comments on<BR>this?<BR><BR>73 de Phil N8VB<BR><BR><BR>------------------------------<BR><BR>Message: 3<BR>Date: Fri, 10 Mar 2006 17:14:44 -0500<BR>From: "Philip Covington" <P.COVINGTON@GMAIL.COM><BR>Subject: Re: [hpsdr] [ATLAS] Gerbers posted...<BR>To: "H. Gruchow" <HORST@NEEDLES.DE><BR>Cc: hpsdr@hpsdr.org<BR>Message-ID:<BR><32aa05ee0603101414s15280907l8e7bacba616fe417@mail.gmail.com><BR>Content-Type: text/plain; charset=ISO-8859-1<BR><BR>On 3/10/06, H. Gruchow <HORST@NEEDLES.DE>wrote:<BR>> ***** High Performance Software Defined Radio Discussion List *****<BR>><BR>> Hello<BR>><BR>> just want to introduce myself to the group and say 'hello world' to<BR>> everybody. This is an outstandingly interesting project and I follow the<BR>> discussions with more and more exitement. Software defined radio has<BR>> brought my interest back to ham radio a few months ago and since then I<BR>> am
collecting every information I can get hands on.<BR>> Unfortunately I cannot contribute much to the project other then<BR>> clapping hands from time to time because I am not a professional in<BR>> electronics like you folks are. And I am lacking time, that's another<BR>> thing. But I am able to solder SMDs!<BR>><BR>> I just had the same problems with the Kicad Gerber viewer under<BR>> WindowsXP. You just can see only full copper layers with some pads here<BR>> and there. I searched the web and found a free Gerber viewer which can<BR>> be downloaded after doing some registration stuff.<BR>><BR>> ViewMate from PentaLogix<BR>><BR>> http://www.pentalogix.com/Download/download.html<BR>><BR>> Only a little contribution but maybe it helps somebody out.<BR>><BR>> Most of the time I will stay in the background admiring the creative<BR>> people in this group but you can be sure that every information is<BR>> soaked up with great
interest.<BR>><BR>> 73<BR>> Horst<BR>> DL6KBF<BR><BR>Hi Horst,<BR><BR>Thanks for posting the link to Viewmate. I have deleted the PDFs of<BR>the gerbers since they were causing confusion.<BR><BR>Welcome to the group. Please feel free to jump in with suggestions<BR>or comments anytime.<BR><BR>73 de Phil N8VB<BR><BR><BR>------------------------------<BR><BR>Message: 4<BR>Date: Fri, 10 Mar 2006 17:49:46 -0500<BR>From: "Eric Ellison" <ECELLISON@COMCAST.NET><BR>Subject: Re: [hpsdr] [ATLAS] Gerbers posted...<BR>To: "'Christopher T. Day'" <CTDAY@LBL.GOV>, "'Ray Anderson'"<BR><RAY.ANDERSON@XILINX.COM>, "'Philip Covington'"<BR><P.COVINGTON@GMAIL.COM><BR>Cc: 'High Performance Software Defined Radio Discussion List'<BR><HPSDR@HPSDR.ORG><BR>Message-ID: <005e01c64494$ee3e59b0$7501a8c0@Development><BR>Content-Type: text/plain; charset="us-ascii"<BR><BR>Chris<BR><BR>Very soon. I was trying to get a direct URL to the form, but there is some<BR>difficulty with that. So if you are
not a member, you will have to sign up<BR>for Dale's site.<BR><BR>Dale should be on Teamspeak Forum tonight and I'll ask then, also send<BR>another e-mail. <BR><BR>Probably by the end of the weekend.<BR><BR>I'll post the procedure.<BR><BR>Thanks<BR>Eric - AA4SW<BR><BR><BR><BR>-----Original Message-----<BR>From: Christopher T. Day [mailto:CTDay@lbl.gov] <BR>Sent: Friday, March 10, 2006 11:20 AM<BR>To: Eric Ellison; Ray Anderson; Philip Covington<BR>Cc: High Performance Software Defined Radio Discussion List<BR>Subject: RE: [hpsdr] [ATLAS] Gerbers posted...<BR><BR>Any idea when the Project Order Form will show up? BTW, I'm done<BR>commenting on the board.<BR><BR><BR>Chris<BR><BR><BR>-----Original Message-----<BR>From: Eric Ellison [mailto:ecellison@comcast.net] <BR>Sent: Thursday, March 09, 2006 4:36 PM<BR>To: 'Ray Anderson'; 'Philip Covington'; Christopher T. Day<BR>Cc: 'High Performance Software Defined Radio Discussion List'<BR>Subject: RE: [hpsdr] [ATLAS] Gerbers
posted...<BR><BR>Ray<BR><BR>Thanks!<BR><BR>Phil has given all of us a fair shot at a tangible design and I think we<BR>all<BR>agree that it is a good foundation for going forward. He has also<BR>incorporated the reasonable ideas we have offered.<BR><BR>Here is what I suggest:<BR><BR>You, myself, Lyle Johnson, Phil Covington go to PM and make a decision<BR>on<BR>which company of those suggested to produce the board. Perhaps we could<BR>coordinate a private Teamspeak session Saturday to make it more<BR>efficient.<BR><BR>We will be the Benevolent Dictators to get this to production ASAP<BR>without<BR>vote. The Atlas is the "Appian Way" of his project!<BR><BR>I'll upfront the $ for the initial run and distribute at cost.<BR><BR>I have already asked Dale - WA8SRA to create a "Project Order Form" on<BR>Hamsdr website. (Thanks again Dale!). I already have orders for 3 boards<BR>without any of us participating (Don't e-mail me, you will have to use<BR>the<BR>order form on Dale's fine
website, and sign up if you have not already!)<BR><BR>I'll generate a PM to you guys. Sorry to others for narrowing it down.<BR><BR>Thanks<BR>Eric<BR><BR><BR><BR>-----Original Message-----<BR>From: Ray Anderson [mailto:ray.anderson@xilinx.com] <BR>Sent: Thursday, March 09, 2006 7:07 PM<BR>To: Eric Ellison; Philip Covington; Christopher T. Day<BR>Cc: High Performance Software Defined Radio Discussion List; Ray<BR>Anderson<BR>Subject: RE: [hpsdr] [ATLAS] Gerbers posted...<BR><BR>Eric-<BR><BR>I agree. I looked over the Gerbers briefly and they look pretty good to<BR>me (at least from a quick look). Phil seems to have captured all the<BR>important stuff at this point. After alpha testing if something needs to<BR>change then let's do it then. In the meantime "blue wire" mods will do<BR>wonders! Feature creep can go on forever.<BR><BR>It looks like the pricing is fairly equal amongst the 'known entity'<BR>shops that people have used and are pleased with. There are at least a<BR>couple
low-price options available (like 5$ versus $50) but their level<BR>of goodness is an unknown quantity. (usually if something sounds too<BR>good to be true it is...) I guess we need to decide which route to go<BR>and place an order.<BR><BR>It would probably be a good idea to run the files thru one of the online<BR>file checkers to see if there are any major file syntax problems or<BR>other incompatibilities.<BR><BR><BR>73 de Ray WB6TPU<BR><BR><BR><BR><BR>-----Original Message-----<BR>From: hpsdr-bounces@hpsdr.org [mailto:hpsdr-bounces@hpsdr.org] On Behalf<BR>Of Eric Ellison<BR>Sent: Thursday, March 09, 2006 3:50 PM<BR>To: 'Philip Covington'; 'Christopher T. Day'<BR>Cc: 'High Performance Software Defined Radio Discussion List'<BR>Subject: Re: [hpsdr] [ATLAS] Gerbers posted...<BR><BR>***** High Performance Software Defined Radio Discussion List *****<BR><BR>Phil<BR><BR>I agree let's lock it down and go for Alpha at least. "Feature Creep"<BR>will<BR>kill us otherwise. There is time for
more features after an alpha run. <BR><BR>Ray Watsa?<BR><BR>Thanks<BR>Eric<BR><BR><BR>-----Original Message-----<BR>From: hpsdr-bounces@hpsdr.org [mailto:hpsdr-bounces@hpsdr.org] On Behalf<BR>Of<BR>Philip Covington<BR>Sent: Thursday, March 09, 2006 11:50 AM<BR>To: Christopher T. Day<BR>Cc: High Performance Software Defined Radio Discussion List<BR>Subject: Re: [hpsdr] [ATLAS] Gerbers posted...<BR><BR>***** High Performance Software Defined Radio Discussion List *****<BR><BR>On 3/9/06, Christopher T. Day <CTDAY@LBL.GOV>wrote:<BR>> It may be that no one currently is using the POWER-ON pin, but should<BR>> that mean that no one _can_? If we're using an ATX power supply, some<BR>> other developer will probably expect to use it like an ATX power<BR>supply.<BR>><BR><BR>Ok, but we have to lock this down somewhere...<BR><BR>I added T9 which brings out the PWR_OK signal from J19.<BR><BR>Phil N8VB<BR>_______________________________________________<BR>HPSDR Discussion List<BR>To
post msg: hpsdr@hpsdr.org<BR>Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org<BR>HPSDR web page: http://hpsdr.org<BR>Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/<BR><BR>_______________________________________________<BR>HPSDR Discussion List<BR>To post msg: hpsdr@hpsdr.org<BR>Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org<BR>HPSDR web page: http://hpsdr.org<BR>Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/<BR><BR><BR><BR><BR><BR>------------------------------<BR><BR>Message: 5<BR>Date: Fri, 10 Mar 2006 18:01:13 -0500<BR>From: "Eric Ellison" <ECELLISON@COMCAST.NET><BR>Subject: Re: [hpsdr] [ATLAS] Gerbers posted...<BR>To: "'H. Gruchow'" <HORST@NEEDLES.DE>, <HPSDR@HPSDR.ORG><BR>Message-ID: <005f01c64496$8f8d40a0$7501a8c0@Development><BR>Content-Type: text/plain; charset="us-ascii"<BR><BR>Horst<BR><BR>Thanks for the introduction! Welcome! It IS exciting. I am a LOT like you,<BR>in that I really can't
contribute much in the way of technology, yet love to<BR>read and I actually surprise myself in that I UNDERSTAND most of it. It is a<BR>pleasure to watch the Phil's, and Bill and others work and give us an<BR>education at the same time. We are very fortunate to have these people<BR>working as a group and being able to see and occasionally contribute<BR>something.<BR><BR>I might add to the group that I have had about 10 personal e-mails about the<BR>Atlas board in the past few days, many of which echo your sentiments! So if<BR>Phil and Phil and Bill and Ray and Leon and Lyle, think that folks are not<BR>lurking and paying attention ***** WRONG! *****<BR><BR>You aint't seen nothin' yet. Wait till you get a gander at the Mercury, and<BR>the Janus!<BR><BR>Thanks<BR>Eric<BR><BR><BR>-----Original Message-----<BR>From: hpsdr-bounces@hpsdr.org [mailto:hpsdr-bounces@hpsdr.org] On Behalf Of<BR>H. Gruchow<BR>Sent: Friday, March 10, 2006 4:50 PM<BR>To: hpsdr@hpsdr.org<BR>Subject: Re: [hpsdr]
[ATLAS] Gerbers posted...<BR><BR>***** High Performance Software Defined Radio Discussion List *****<BR><BR>Hello<BR><BR>just want to introduce myself to the group and say 'hello world' to <BR>everybody. This is an outstandingly interesting project and I follow the <BR>discussions with more and more exitement. Software defined radio has <BR>brought my interest back to ham radio a few months ago and since then I <BR>am collecting every information I can get hands on.<BR>Unfortunately I cannot contribute much to the project other then <BR>clapping hands from time to time because I am not a professional in <BR>electronics like you folks are. And I am lacking time, that's another <BR>thing. But I am able to solder SMDs!<BR><BR>I just had the same problems with the Kicad Gerber viewer under <BR>WindowsXP. You just can see only full copper layers with some pads here <BR>and there. I searched the web and found a free Gerber viewer which can <BR>be downloaded after doing some registration
stuff.<BR><BR>ViewMate from PentaLogix<BR><BR>http://www.pentalogix.com/Download/download.html<BR><BR>Only a little contribution but maybe it helps somebody out.<BR><BR>Most of the time I will stay in the background admiring the creative <BR>people in this group but you can be sure that every information is <BR>soaked up with great interest.<BR><BR>73<BR>Horst<BR>DL6KBF<BR>_______________________________________________<BR>HPSDR Discussion List<BR>To post msg: hpsdr@hpsdr.org<BR>Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org<BR>HPSDR web page: http://hpsdr.org<BR>Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/<BR><BR><BR><BR>------------------------------<BR><BR>Message: 6<BR>Date: Fri, 10 Mar 2006 18:07:59 -0500<BR>From: "Eric Ellison" <ECELLISON@COMCAST.NET><BR>Subject: Re: [hpsdr] [ATLAS] File update 10 March 2006<BR>To: "'Philip Covington'" <P.COVINGTON@GMAIL.COM>, "'High Performance<BR>Software Defined Radio Discussion List'"
<HPSDR@HPSDR.ORG><BR>Message-ID: <006001c64497$7c1f62e0$7501a8c0@Development><BR>Content-Type: text/plain; charset="us-ascii"<BR><BR><BR><BR>Phil<BR>Sorry but:<BR><BR>What? I think I understand but what missing ground plane? <BR><BR>If anyone attempts this with a $3.00 radio shack soldering iron you need<BR>your head examined! I think I know someone who would assemble the board at a<BR>price if you are incapable. I personally am NOT in favor of compromising the<BR>electrical design for convenience if that is what is being suggested.<BR><BR>Eric<BR><BR><BR>I added thermals to the DIN41612 and ATX connectors as requested by<BR>Helmut. I posted my reasons for wanting to avoid thermals on the top<BR>layer, but upon further consideration I went ahead and added them<BR>since people's soldering skills and capabilities vary widely. It is<BR>(probably?) more important to make it easy to construct than to worry<BR>too much about the missing ground plane. Any further comments
on<BR>this?<BR><BR>73 de Phil N8VB<BR>_______________________________________________<BR>HPSDR Discussion List<BR>To post msg: hpsdr@hpsdr.org<BR>Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org<BR>HPSDR web page: http://hpsdr.org<BR>Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/<BR><BR><BR><BR>------------------------------<BR><BR>Message: 7<BR>Date: Fri, 10 Mar 2006 18:26:48 -0500<BR>From: "Eric Ellison" <ECELLISON@COMCAST.NET><BR>Subject: [hpsdr] Update?<BR>To: "'Leon Heller'" <LEON.HELLER@BULLDOGHOME.COM><BR>Cc: 'High Performance Software Defined Radio Discussion List'<BR><HPSDR@HPSDR.ORG><BR>Message-ID: <006201c6449a$20197730$7501a8c0@Development><BR>Content-Type: text/plain; charset="us-ascii"<BR><BR>Leon<BR><BR><BR><BR>Can we get an update? Things are falling into place! This is not a<BR>criticism. Just a hobby and a wonderful group to learn from for most of us!<BR>The Lionheart is the next most important component in the 'chain'
of<BR>components. I'm sure there are folks who will volunteer to help with the<BR>design. <BR><BR><BR><BR>I have secured a 2 hour SDR presentation slot for SDR at the Dayton<BR>Hamvention and have already slotted this HPSDR initiative as one of the<BR>presentations in the timeframe. I think I have identified a person to<BR>present everyone's HPSDR projects but will have more on that later.<BR>Hopefully (if I can get my act together) I will present something at<BR>Freidrichschafen in June. A lot depends on the components of the project<BR>'falling into place' to be successful. <BR><BR><BR><BR>Comments:<BR><BR><BR><BR>Eric<BR><BR><BR><BR><BR><BR><BR><BR><BR><BR><BR><BR>-------------- next part --------------<BR>An HTML attachment was scrubbed...<BR>URL: /pipermail/hpsdr-hpsdr.org/attachments/20060310/13de623f/attachment-0001.html<BR><BR>------------------------------<BR><BR>Message: 8<BR>Date: Sat, 11 Mar 2006 07:25:19 +0100<BR>From: "H. Gruchow" <HORST@NEEDLES.DE><BR>Subject: Re:
[hpsdr] [ATLAS] Gerbers posted...<BR>To: Eric Ellison <ECELLISON@COMCAST.NET>, hpsdr@hpsdr.org, Philip<BR>Covington <P.COVINGTON@GMAIL.COM><BR>Message-ID: <44126D4F.9030906@needles.de><BR>Content-Type: text/plain; charset=ISO-8859-1; format=flowed<BR><BR>Hi Phil and Eric,<BR><BR>thanks very much for the warm welcome within this group.<BR>Phil, by the way, you can put me on the list for two (2) ATLAS boards <BR>which I would like to purchase.<BR><BR>Just a suggestion: international payment is most convenient and <BR>hassle-fre using PayPal.<BR><BR>73<BR>Horst<BR>DL6KBF<BR><BR><BR><BR>------------------------------<BR><BR>Message: 9<BR>Date: Sat, 11 Mar 2006 09:49:35 -0500<BR>From: "Eric Ellison" <ECELLISON@COMCAST.NET><BR>Subject: Re: [hpsdr] [ATLAS] Gerbers posted...<BR>To: "'H. Gruchow'" <HORST@NEEDLES.DE>, <HPSDR@HPSDR.ORG>, "'Philip<BR>Covington'" <P.COVINGTON@GMAIL.COM><BR>Message-ID: <001201c6451b$0be469b0$7501a8c0@Development><BR>Content-Type: text/plain;
charset="us-ascii"<BR><BR>Horst et.al.<BR><BR>I do have PayPal set up and will take payments in that manner. I'm still<BR>getting 'set up' with an ordering form on Dale - WA8SRA website. <BR><BR>Eric - AA4SW<BR><BR><BR>-----Original Message-----<BR>From: H. Gruchow [mailto:horst@needles.de] <BR>Sent: Saturday, March 11, 2006 1:25 AM<BR>To: Eric Ellison; hpsdr@hpsdr.org; Philip Covington<BR>Subject: Re: [hpsdr] [ATLAS] Gerbers posted...<BR><BR>Hi Phil and Eric,<BR><BR>thanks very much for the warm welcome within this group.<BR>Phil, by the way, you can put me on the list for two (2) ATLAS boards <BR>which I would like to purchase.<BR><BR>Just a suggestion: international payment is most convenient and <BR>hassle-fre using PayPal.<BR><BR>73<BR>Horst<BR>DL6KBF<BR><BR><BR><BR>------------------------------<BR><BR>Message: 10<BR>Date: Sat, 11 Mar 2006 13:35:08 -0500<BR>From: "Eric Ellison" <ECELLISON@COMCAST.NET><BR>Subject: [hpsdr] Teamspeak Audio - 03-11-06 - Dayton etc.<BR>To:
<HPSDR@HPSDR.ORG><BR>Message-ID: <000501c6453a$85eb2e00$7501a8c0@Development><BR>Content-Type: text/plain; charset="us-ascii"<BR><BR>Folks!<BR><BR><BR><BR>Eric - AA4SW <BR>Is working on producing Atlas motherboard for the HPSDR project. Phil<BR>Covington N8VB created the project in PADS and, after incorporating<BR>suggestions from hpsdr forum members for this component of the project which<BR>will rapidly go to copper and be distributed for sale in the near future by<BR>myself. (Thanks Phil!)<BR>Dayton Hamvention May 19-21, 2006. I have secured a block of 2 hours for SDR<BR>presentations between Noon and 2 P.M. on 20 May. Tony - KB9YIG has accepted<BR>a slot in the presentaions on the SoftRock40. Another slot is reserved for<BR>HPSDR project, with Presenter to be determined. I will keep everyone<BR>informed on the Dayton SDR happenings as we near the event. I will also post<BR>Audio (via Teamspeak, as well as video) from the FlexRadio Suite on Saturday<BR>night, sponsored by
FlexRadio Systems. Gerald - K5SDR has a Forum session on<BR>Saturday 20 May at 10 p.m. <BR><BR>Bob - K5KDN <BR>Has again retired after a work stint in Austin. Reviewing CAT command set<BR>and working with Flex. <BR><BR>Brian - VK1BF <BR>Still waiting Fall and cooler temperatures, in Canberra! <BR><BR>Cecil - KD5NWA <BR>Now has VS 2003 and planning the documentation on PowerSDR with volunteers. <BR><BR>Dale - WA8SRA <BR>Will be posting an Atlas order form on HPSDR Atlas board. <BR><BR>Dan - N4XWE <BR>Got DDS 60 kit from AmQRP and DDS 9851 for free as sample. Working on Linux<BR><BR>=== message truncated ===</BLOCKQUOTE><BR>