<div>I would avoid using T50 cores at 100 watts. Might get away with stacking 2 or 3 cores.</div>  <div>Red for low end and yellow 40 meters and above</div>  <div>T68 work well up to around 200W. Also allows larger wire to keep the resistance low.</div>  <div>Check RF current rating of caps might need to parallel multiple units to keep them cool.</div>  <div>Stay away from XR7 dielectric caps. </div>  <div>Relays use the ones about the size as a SRA1 mixer can. Then can take the voltage. </div>  <div>Add at least a gas tube for static protection. I would think some sort of a clipper needs to be ahead of an expensive A/D. Biased Transorbs isolated by low C fast diodes at least.</div>  <div>I'm a bit worried about a D/A making a clean signal. We know what a D/A in a DDS does, how is this different? frank wa1gfz</div>