<div>Hi all,</div>  <div>I was able to get a carrier out of Penny tonight but no modulation with mic connected to Penny. I need to look back at posts as I seen to remember another guy having this problem.</div>  <div>I do notice you get a full output transient when first keyed then the level drops to the set point.</div>  <div>I had to configure software as a SDR1000 to get the TX to key. It will not key as a softrock. </div>  <div>Also I was getting a high SWR message with over 500 watts output. I'm sure this is my weird configuration.  frank</div>