<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16640" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>Well, I finally got time to install Penny into
Atlas, having set the jumpers etc.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The Operation with PowerSDR guide didn't mention
specific details of how to configure PowerSDR so I made some (hopefully)
intelligent guesses - e.g. answered NO to the 100W PA present question and NO to
the ATU present question. I also assumed that the MOX button on PowerSDR
will still turn on TX until I come up with a real PTT switch. I also
disconnected the Janus output going to the SDR-1000 "To Line Out" jack since
Penny doesn't want any TX competition!</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I've got my Cobra wire antenna connected to the
SDR-1000 for RX and Penny connected to the R5 vertical to TX until I get my
TX/RX relay sorted out.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Marginal indication on my Power meter but it's
not meant to read that low a level but -- I can hear myself on a 2nd RX with a
bit of wire stuffed in the antenna connection so I guess Penny is
working! I'm sure I'll have lots of questions later, but so far,
looking good.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Once again, many thanks to the developers, both HW
and SW -- great job!</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Pete, N3EVL</FONT></DIV></FONT></DIV></BODY></HTML>