<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;"><DIV>OK All you Software wizards here is one to think about. Today I wanted to check close in dynamic range so set my generators at 5 KHz spacing on 75 meters. The generators were higher than 100 dB above the noise floor. The spur was visable on the display and I could hear a cw tone. I dropped the signal levels to around 100 dB above the noise floor and the tone went away as well as the pip on the display. </DIV>
<DIV>Then I noticed every few seconds a loud click in the audio and the S meter showed a transient. I had to drop the generator levels quite low to eliminate this transient output.</DIV>
<DIV>AGC-T was at 120. Dither Enabled and Random Enabled.  Frank WA1GFZ</DIV></td></tr></table>