<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=US-ASCII">
<META content="MSHTML 6.00.2900.2180" name=GENERATOR></HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial"
bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=role_document
face=Arial color=#000000 size=2>
<DIV>
<DIV>Dale</DIV>
<DIV> </DIV>
<DIV>Try modifying initozy11.bat as follows then run initozy11.bat again:</DIV>
<DIV> </DIV>
<DIV>load_firmwareV1.1 0xfffe 0x0007 ozyfw-sdr1k.hex<BR>sleep
3000<BR>upload_FPGAV1.1 0xfffe 0x0007
Ozy_Janus.rbf<BR>rem 1E 00 - Reset
chip<BR>rem 12 01 - set digital
interface active<BR>rem 08 15 - D/A
on, mic input, mic 20dB boost<BR>rem
08 14 - ditto but no mic boost<BR>rem
0C 00 - All chip power on<BR>rem 0E 02
- Slave, 16 bit, I2S<BR>rem 10 00 -
48k, Normal mode<BR>rem 0A 00 - turn
D/A mute off<BR>write_i2cV1.1 0xfffe 0x7 0x1a 0x2 0x1e
0x00<BR>write_i2cV1.1 0xfffe 0x7 0x1a 0x2 0x12 0x01<BR>write_i2cV1.1
0xfffe 0x7 0x1a 0x2 0x08 0x15 change this from 0x15 to
0x14<BR>write_i2cV1.1 0xfffe 0x7 0x1a 0x2 0x0c 0x00<BR>write_i2cV1.1
0xfffe 0x7 0x1a 0x2 0x0e 0x02<BR>write_i2cV1.1 0xfffe 0x7 0x1a
0x2 0x10 0x00<BR>write_i2cV1.1 0xfffe 0x7 0x1a 0x2 0x0a
0x00<BR>rem <BR>rem the following are for penny <BR>write_i2cV1.1 0xfffe 0x7
0x1b 0x2 0x1e 0x00<BR>write_i2cV1.1 0xfffe 0x7 0x1b 0x2
0x12 0x01<BR>write_i2cV1.1 0xfffe 0x7 0x1b 0x2 0x08 0x15 change this
from 0x15 to 0x14<BR>write_i2cV1.1 0xfffe 0x7 0x1b 0x2 0x0c
0x00<BR>write_i2cV1.1 0xfffe 0x7 0x1b 0x2 0x0e 0x02<BR>write_i2cV1.1
0xfffe 0x7 0x1b 0x2 0x10 0x00<BR>write_i2cV1.1 0xfffe 0x7 0x1b
0x2 0x0a 0x00<BR>rem pause<BR></DIV>
<DIV>Good luck 73 de Joe</DIV>
<DIV> </DIV>
<DIV>In a message dated 12/29/2008 6:54:18 P.M. Eastern Standard Time,
dmb@lightstream.net writes:</DIV>
<BLOCKQUOTE
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: blue 2px solid"><FONT
style="BACKGROUND-COLOR: transparent" face=Arial color=#000000 size=2>*****
High Performance Software Defined Radio Discussion List *****<BR><BR>With no
microphone plugged in, the PSDR 'Mic Gain' slider set to 0, and <BR>the "Mic
Boost" checkbox not-checked (Setup > Audio > Primary), the Mic <BR>meter
indicates about -25 dB, and the Panadapter indicates -70dBm. If <BR>the noise
gate is set high enough, the Panadapter signal level drops <BR>completely out
of view, and the transmitted background noise drops <BR>considerably (as
monitored on another receiver).<BR><BR>Should the no-signal level be that
high, or have I missed a setting or <BR>jumper somewhere?<BR><BR>73,
Dale<BR>WA8SRA<BR><BR></FONT></BLOCKQUOTE></DIV>
<DIV></DIV>
<DIV> </DIV></FONT><BR><BR><BR><DIV CLASS="aol_ad_footer" ID="a90a273a8e5a2667d5835021a72fe9e"><FONT style="color: black; font: normal 10pt ARIAL, SAN-SERIF;"><HR style="MARGIN-TOP: 10px">Don't be the last to know - <a href="http://www.aol.com/?ncid=emlcntaolcom00000021">click here<a/> for the latest news that will have people talking.</FONT></DIV></BODY></HTML>