<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16788" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Experimenting (playing) with Mercury
here</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>calibration:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>It seems that you must start with the preamp
ON. If I start with the preamp off, it finishes with the preamp ON and the
signal level is off by exactly 20 dB.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>NB:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I have some nasty noise on 903 MHz and NB2 quiets
it down quite nicely - but only at 48k ks/s</FONT></DIV>
<DIV><FONT face=Arial size=2>As soon as I switch to the higher rates, the noise
comes back. Bug or feature?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>73</FONT></DIV>
<DIV><FONT face=Arial size=2>Ken</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Mercury firmware 2.2</FONT></DIV>
<DIV><FONT face=Arial size=2>PowerSDR v 1.10.4+</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>