<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;"><DIV>Phil,</DIV>
<DIV>I'll do the phase noise test again but I want to try a better source. I have a 10 MHz. TCXO kicking around somewhere. That should be cleaner than the Racal VXO loop.</DIV>
<DIV> </DIV>
<DIV>MRF150 BIAS. Find an old motorola data sheet and look at the fine print. It says you can get 50 watts at -50 dB IP3 but I think the bias is at 3 amps. I don't think the CCI heat sink can handle that kind of heat 48V X 12A. A friend built an EB104 to be used as a driver for a linear. He has not set it up yet. Also not sure how the transformers will hang in.  He will find out soon.</DIV>
<DIV>The ERBTEC strip is 3 stages and I was able to hit -40 dB with a lot of bias on the driver and final but it got hot fast. Predriver runs class A so it is all set. I'll be getting back to it soon. Anybody gets one I have the changes and schematic. Not bad 300 watt PEP strip for $60. It does take some rewinding and parallel about 20 caps.</DIV>
<DIV>Frank WA1GFZ</DIV></td></tr></table>