<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;"><DIV>Hi All,</DIV>
<DIV>I reran the phase noise tests and got about the same numbers but the audio pops are gone.</DIV>
<DIV>Also I see the noise floor of my source on the display clearly showing a phased locked VXO is not clean enough. I tried the reference of my HP8640B but it had some 10 KHz sidebands down about 90 dB so thought it would look for something cleaner. I'll run it again when i find a better source.</DIV>
<DIV>It sure is cleaner than any synthesizer. </DIV>
<DIV>I'm up to date on the software and see no real issues yet.</DIV>
<DIV>Started collecting parts for the final including a nice Harris Low Pass output board with TR relay, Directional coupler and 8 different filter banks. All 12 volt relay controlled. Looks like it  can handle hundreds of watts. It should work well with the ERBTEC MRF150 board.</DIV>
<DIV>frank </DIV></td></tr></table>