<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;"><DIV>Hi Everyone,</DIV>
<DIV>I reloaded 2.4 and now get overload RED at around -12 dBM. Didn't check with attenuator switched in because of the bad relay. TAPR has one in the mail to me. </DIV>
<DIV>I checked phase noise again at -15 dBM input. Looks quite good. At 20 KHz out the noise floor is up 5 dB, At 50 KHz out 5 dB and at 100 KHz out noise up 3 dB. The noise floor is at around -136 dBM on the display.</DIV>
<DIV> I have a long coax run to the generator so may need some RG223 or RG400. MDS at 5 MHz 500 Hz BW about -140 dBM. I need to adapt one of the audio connectors to my RMS meter for better results.</DIV>
<DIV>Still have the Racal VXO reference that has some noise. Just wanted to change one thing at a time. Phase noise going through -100 dBc at 400 hz on a 500 hz filter. I can see noise sidebands on the display from the reference.</DIV>
<DIV>Dry in the shack, so far I remember to put the ESD strap on. frank WA1GFZ</DIV>
<DIV> </DIV></td></tr></table>