<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;"><DIV> </DIV>
<DIV>Very cool !</DIV>
<DIV> The open space. Am I to assume no smart guy is going to come up with a front panel LCD display and knobs to make this stand alone with an internal computer? I ask this question because I think I can build a linear power supply in the open space that will provide power for a final I just got going. I modified an erb tech MRI board that is now 5 X 12 inches.</DIV>
<DIV>Three stages push pull MRF134s, MRF148s and final MRF150s. It easily makes 100 watts at 28 volts and you really have to try hard to hurt a MFR150 at that voltage. Also in class A the MRF150 spec says it will do -50 dB third order at 100 watts per pair. This is why I have 1200 square inches of surface area for a heat sink. I read the transformer was can be reversed on Penny to get more power. I have not done this.   Options would to mount the amplifier in a shielded box off the back or pandora or hog out a hole and mount a heat sink against the panel. My present heat sink is 6 by 12 with 3 inch fins with a 5 by 12 inch slab of 1/4 inch copper as a heat spreader.</DIV>
<DIV>I would put the amplifier in a different box if one of you guys has better palns for the blank panel. I've made a number of contacts on 160 and 80 meters the past few days with good reports using an EV664 mic.</DIV>
<DIV>My first impression looking at the trap door was supporting the boards from moving. Foam usually breaks down in time. All it would take is a strip of metal or plastic with slots to catch the inside corners of each board. Future boards we should consider a bit more keep out area near the tops of each board. Also BNC connectors should be threaded so they get a good ground when passed through the slot cover. This would be a good idea for Alex if it isn't too late. HP performance requires HP shielding. </DIV>
<DIV>I have been living in ESD fear all winter with my set up sitting on a plate and was considering using an old rack mounted computer as an enclosure.  </DIV>
<DIV>I did some testing with a friend Sunday and he told me Penny is very clean on SSB and AM. Frank WA1GFZ</DIV></td></tr></table>