Hi all, <br><br>While I have been having absolutely no problems finding designs for medium power (50W - 600W) wide band amplifiers there is a lack of anything that can be used to bridge the gap from HPSDR output levels to what is required for input on some of these designs.<br>
<br>In my case I have been getting the parts together for a BLF177 300W wide band linear as described in Phillips Application Note NCO8703 ( <a href="http://www.nxp.com/acrobat_download/applicationnotes/NCO8703.pdf">http://www.nxp.com/acrobat_download/applicationnotes/NCO8703.pdf</a> ). This requires ~1.5W to drive at full power.<br>
While it will put out a respectable 100W at 500mW input the 3rd and 5th order distortion products are a little higher than I would like at that lowered power level. <br><br>I know I can get a 5W amp then pad it down to do the trick, but this really feels like a hack (and a waste of 5-10W of supply power)  to me so I am looking to put together something that will give a nice clean ~1db gain as an intermediate.<br>
I know, small order, but not so easy to fill. :)<br><br>Any suggestions or pointers?<br><br>73,<br>Todd M0GLO <br>