<DIV style="font-family:Arial, sans-serif; font-size:10pt;"><DIV>Has anyone been able to get their logging software's CW keyer to work with HPSDR?  I've been trying for quite a while with no luck.</DIV>
<DIV> </DIV>
<DIV>I've tried using a virtual com port (N8VBvCOMM) and setting it up in PowerSDR's Setup, DSP, Keyer, Connections, Primary. Every setting I try either doesn't key the radio or transmits all the time.  (N8VBvCOMM works fine for CAT freq/mode)</DIV>
<DIV> </DIV>
<DIV>I also tried using a simple parallel port keying circuit that has worked on every other radio I've tried. </DIV>
<DIV><A href="http://n5en.com/lpt-keyer.jpg">http://n5en.com/lpt-keyer.jpg</A></DIV>
<DIV>I connected it's 'rig key +' line to Qzy DB9 pin 7 (dot) and it's 'ground' line to Ozy DB9 pin 5 (common), as what would seem to work per page 10 of the Janus/Ozy manual:</DIV>
<DIV><A href="http://openhpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf">http://openhpsdr.org/wiki/images/f/f6/Janus_%26_Ozy_with_PowerSDR_v2-0.pdf</A></DIV>
<DIV>This setup works 'very' intermittently.  For example, it's unable to send my short call sign cleanly at any speed.  Again, this keying circuit works perfectly on every other radio I've tried.</DIV>
<DIV> </DIV>
<DIV>So... if anyone has their logging software's keyer sending CW with HPSDR, please let me know how you're doing it.</DIV>
<DIV> </DIV>
<DIV>Thanks & 73</DIV>
<DIV>Steve N5EN</DIV>
<DIV><A href="http://n5en.com/lpt-keyer.jpg"></A> </DIV></DIV>