<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=US-ASCII">
<META content="MSHTML 6.00.2900.2180" name=GENERATOR></HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial" bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=role_document face=Arial color=#000000 size=2>
<DIV>Lou</DIV>
<DIV> </DIV>
<DIV>You can edit initozy11.bat as follows:</DIV>
<DIV> </DIV>
<DIV>******</DIV>
<DIV> </DIV>
<DIV>loadFW 0xfffe 0x0007 ozyfw-sdr1k.hex<BR>msecsleep 3000<BR>loadFPGA 0xfffe
0x0007 Ozy_Janus.rbf<BR>rem 1E 00 -
Reset chip<BR>rem 12 01 - set digital
interface active<BR>rem 08 15 - D/A
on, mic input, mic 20dB boost<BR>rem
08 14 - ditto but no mic boost<BR>rem
0C 00 - All chip power on<BR>rem 0E 02
- Slave, 16 bit, I2S<BR>rem 10 00 -
48k, Normal mode<BR>rem 0A 00 - turn
D/A mute off<BR>writeI2C 0xfffe 0x7 0x1a 0x2 0x1e 0x00<BR>writeI2C
0xfffe 0x7 0x1a 0x2 0x12 0x01<BR>writeI2C 0xfffe 0x7 0x1a
0x2 0x08 0x15 edit 0x15 to 0x14 (for Janus)<BR>writeI2C 0xfffe 0x7
0x1a 0x2 0x0c 0x00<BR>writeI2C 0xfffe 0x7 0x1a 0x2 0x0e
0x02<BR>writeI2C 0xfffe 0x7 0x1a 0x2 0x10 0x00<BR>writeI2C 0xfffe
0x7 0x1a 0x2 0x0a 0x00<BR>rem<BR>rem the following are for
penny<BR>writeI2C 0xfffe 0x7 0x1b 0x2 0x1e 0x00<BR>writeI2C 0xfffe
0x7 0x1b 0x2 0x12 0x01<BR>writeI2C 0xfffe 0x7 0x1b 0x2
0x08 0x15 edit 0x15 to 0x14 (for Penny)<BR>writeI2C 0xfffe 0x7 0x1b
0x2 0x0c 0x00<BR>writeI2C 0xfffe 0x7 0x1b 0x2 0x0e
0x02<BR>writeI2C 0xfffe 0x7 0x1b 0x2 0x10 0x00<BR>writeI2C 0xfffe
0x7 0x1b 0x2 0x0a 0x00<BR>rem pause</DIV>
<DIV> </DIV>
<DIV>See the "rem" statements at beginning of file.</DIV>
<DIV> </DIV>
<DIV>******</DIV>
<DIV> </DIV>
<DIV>Make sure you set jumpers correctly on Penny for a condenser mike for
the</DIV>
<DIV>Logitech headset. If you need more gain, you can check "Mic Boost" on</DIV>
<DIV>in Setup on Primary audio tab. Don't forget to either manually run
initozy11.bat</DIV>
<DIV>or shut power off to penny for the edit changes to take place.</DIV>
<DIV> </DIV>
<DIV>73 de Joe</DIV>
<DIV>K1RQG</DIV>
<DIV> </DIV>
<DIV>
<DIV>In a message dated 6/26/2010 1:25:32 A.M. Eastern Daylight Time,
n1giz@yahoo.com writes:</DIV>
<BLOCKQUOTE style="PADDING-LEFT: 10px; MARGIN-LEFT: 10px"><FONT style="BACKGROUND-COLOR: transparent" face=Arial color=#000000 size=2>*****
High Performance Software Defined Radio Discussion List *****<BR><BR>First the
Heil hc-5 over drives power sdr (vox set to max)<BR>and second the Logitech
skype head set under<BR>drives (not enough drive for Penelope) power
sdr.<BR><BR>Any help would be greatly appreciated.<BR><BR><BR>Thanks<BR>Lou
n1giz<BR><BR><BR></FONT></BLOCKQUOTE></DIV></FONT></BODY></HTML>