Hi Chris,<div>You have described one of my thoughts about interface. I agree absolutely! I even think that it is quite possible to register front panel buttons as USB keyboard, only sequence of keys would be something like Shift+Ctrl+Alt+any assigned key for adequate command. That way you can program PowerSDR or any other software to behave according the front panel you have. </div>
<div>Colleague of mine is working with Tipro - <a href="http://www.tipro.net">www.tipro.net</a> and I have access to some of their development. </div><div><br></div><div>I know about Korg. They are doing their front panels with Shaeffer-ag.de. I intend to use their service for panel prototype.</div>
<div>Thank you for web links.</div><div><br></div><div>Boris</div><div>9A5ATY</div><div><a href="http://www.9a9.me">www.9a9.me</a></div><div><br></div><div><br></div><div> </div><div><br><br><div class="gmail_quote">On Mon, Jul 19, 2010 at 7:55 PM, Chris Albertson <span dir="ltr"><<a href="mailto:albertson.chris@gmail.com">albertson.chris@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">This has come up a few times.   I think the very best way to do this<br>
is to build your pannel some that is uses MIDI protocol.   The reason<br>
for this is so you and others can leverage existing software.<br>
<br>
What I mean is you want to avoid the problem where your pannel and<br>
(say) my pannel each requie different software interface.  If al our<br>
pannels could use the same software then the state of that software<br>
could avance much faster.<br>
<br>
Also with MIDI those who don't want to build their ownhardware can buy<br>
nice looking control pannels already built like these:<br>
<br>
(1) Korg nanoKONTROL USB Controller<br>
This has 10 rotary enconders, sliders and 20 push puttons and has USB<br>
connection.  Sells for $65.<br>
<br>
Here is another example<br>
(2) <a href="http://www.sweetwater.com/store/detail/OmniControl/" target="_blank">http://www.sweetwater.com/store/detail/OmniControl/</a><br>
All of those controls you see in the photo as "asignable" to whatever<br>
functions you want.  Connects to computer with USB<br>
<br>
Yes you can design and build your own but PLEASE follow existing<br>
standards and make your new panel work like all the existing ones.<br>
<br>
If I were starting a project like this I'd rush out and buy a $65 Korg<br>
Nana controller so that I could start on the software and not have to<br>
wait for hardware to be done.  It is very hard to develope both<br>
hardware and software at the same time because both will be buggy for<br>
a long time.  It is well worth $65 to have known-to-work hardware for<br>
software development.<br>
<br>
If you do use this standard then you inherit a whole world of<br>
infrastructure for transporting and routing control data over networks<br>
and for recording, editing and display of the data and also<br>
<br>
On Mon, Jul 19, 2010 at 5:31 AM, Boris Njegic <<a href="mailto:boris.njegic@gmail.com">boris.njegic@gmail.com</a>> wrote:<br>
> ***** High Performance Software Defined Radio Discussion List *****<br>
<div><div></div><div class="h5">><br>
><br>
> Hi,<br>
> I have just finished modification of my FT-450 (<a href="http://www.9a9.me" target="_blank">www.9a9.me</a>) so now I have time to go for next project. I would like to make front panel for my HPSDR setup.<br>
> My current setup is Atlas, Penny,PennyWhistler, Mercury, Ozy, 100W amplifier, homemade tx/rx switch and waiting for Alex boards and Hermes to be finished.<br>
> PC is ASRock ION 330 atom miniITX.<br>
> Wish list for now is:<br>
> 1. Front panel will be a mix of functionality between IC7800 and FT5000 (Large front panel with as much direct calling of SDR functions)<br>
> 2. Some functions will be added regarding SDR specifics.<br>
> 3. There will be two large dials - first (5.5cm) for VFO A and second (4cm) for VFO B (Or if you like for first and second receiver)<br>
> 4. 7" Touch screen LCD<br>
> 5. Only some specific functions will be implemented only on touch screen. All other primary (operating) functions will be invocable with push buttons or dials.<br>
> 6. Front panel dimensions will be cca 425mm X 135mm<br>
> 7. It will interface with PC as standard USB keyboard<br>
> 8. Headphone connector.<br>
> 9. Keyer connector.<br>
> 10. Mic connector<br>
> 11. 3 or 4 USB hub connectors on front panel<br>
> 12. Dial for lower filter cutoff freq and Dial for Upper filter cutoff freq.<br>
> 13. Cw speed dial<br>
> 14. ....<br>
> Is there something I should take special care of? Remember this is my first post about this so I am collecting ideas :-)<br>
> I am not EE so I will try to build this from parts that are posible to get on internet or other sources.<br>
> Regards,<br>
> Boris<br>
> 9A5ATY<br>
><br>
> --<br>
> BNJ<br>
><br>
</div></div>> _______________________________________________<br>
> HPSDR Discussion List<br>
> To post msg: <a href="mailto:hpsdr@openhpsdr.org">hpsdr@openhpsdr.org</a><br>
> Subscription help: <a href="http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org" target="_blank">http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org</a><br>
> HPSDR web page: <a href="http://openhpsdr.org" target="_blank">http://openhpsdr.org</a><br>
> Archives: <a href="http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/" target="_blank">http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/</a><br>
><br>
<font color="#888888"><br>
<br>
<br>
--<br>
=====<br>
Chris Albertson<br>
Redondo Beach, California<br>
</font></blockquote></div><br><br clear="all"><br>-- <br>BNJ<br>
</div>