<p>I am wondering if anybody can help me with a problem I'm having with new hardware.  I recently put together a new HPSDR ( LPU+Atlas+Magister+Mercury).  I built up Atlas and LPU, and they seem to be fine ( Atlas has 4.98V, 12.00V. -12.5V under load. ( I am using a 13.8V 10A linear psu to run the whole system).  10 MHz Clock source in all cases was Mercury. </p><p> </p><p>I put everything together, checked the jumpers, and attempted to get the system running with three systems;</p><p> </p><p>The first  system I tried was a Mac, with snow leopard, running MacHPSDR.  On starting the program, the FPGA on Magister appeared to load, an I heard the antenna relay on Mercury click, but nothing more.  It appeared that Mercury was not talking to Magister, and save was not sending any data down the USB pipe to the Mac software.</p><p> </p><p>The next thing I tried, was a PC running 64 bit Windows 7.  I downloaded and installed PowerSDR, but could not get the special USB drivers installed and  operating with my system, so I abandoned the attempt.</p><p> </p><p>Last but not least, I attempted to run ghpsdr on my Ubuntu Linux 10.04 box.  After messing around for a few minutes with the permissions and the rules files, I ran "initozy" and succesfully programmed Magister's FPGA, but I was getting error messages about unsuccessful write attempts to the I2C bus.  I tried starting ghpsdr, and the gui started OK but with the same result as MacHPSDR, no data coming down the pipe.  Looking at the command line console, I could see continuous error messages about missing data generated by ghpsdr.</p><p> </p><p>No Joy.</p><p> </p><p>Does anybody have any Idea what is wrong? I am continuing to work on this problem, but I would appreciate a beam of light to pierce the darkness.</p><p> </p><p>Thanks in Advance,</p><p> </p><p>Gar Fisher,</p><p> </p><p>VA7GRR <br /></p>