<br><div class="gmail_quote">On Wed, Nov 10, 2010 at 3:26 PM, John Melton <span dir="ltr"><<a href="mailto:john.d.melton@googlemail.com">john.d.melton@googlemail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">

<div class="im">***** High Performance Software Defined Radio Discussion List *****<br>
The data between the hardware and PC is defined in the document</div>
"USB protocol V1.27.doc" in the svn at<br>
svn://<a href="http://64.245.179.219/svn/repos_sdr_hpsdr/trunk/Documentation" target="_blank">64.245.179.219/svn/repos_sdr_hpsdr/trunk/Documentation</a>.  The basic<br>
data from the hardware to the PC is status information, I/Q samples from<br>
Mercury and microphone samples Penelope.  The data from the PC to the<br>
hardware is basically I/Q data to Penelope, audio data to Mercury and<br>
control information.<br></blockquote><div><br></div><div>I'm recently getting into this too, and one of the reasons I joined is so that I would not have to hear transmitted signal be described as "audio data".  I've already been told that the transmit bandwidth using Ozy is ~150 KHz, will Metis permit a wider signal capability?</div>

</div>