<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;"><DIV>G.E. everyone,</DIV>
<DIV>A couple days ago I posted a screen shot of my signal with transients and drop outs. I was also getting the same drop outs on RX. The first thing I did was remove all the old server software on my machine from another life. Then I made a few changes that could be old news but here goes. Setup on Audio primary page I reduced the buffer to 256 and increased the sample rate to 192000. Then on the DSP tab I reduced both buffers to 1024.</DIV>
<DIV>My set up never ran well at 192K but tonight it seems fine. The delay between HPSDR and my analog RX  seems almost zero. </DIV>
<DIV>Now for the transient. I wonder if running a long buffer is the issue when it can't empty out when the rig is unkeyed? This leaves some data behind during the transition between TX and RX showing up as a modulation transient. </DIV>
<DIV>These changes did cost some horsepower. I increased from about 7% to around 16%</DIV>
<DIV>But everything seems happy. I'll run like this for a while and see if it is fixed. </DIV>
<DIV>Frank WA1GFZ</DIV></td></tr></table>