<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;"><DIV>Hi All,</DIV>
<DIV>Today I tried some two tone testing with the new Metis set up. When I tried AM the tone level was equal to the carrier level. At 100% modulation the modulation should be 6 dB below the carrier. I could not find a setting that reduced the level of the test audio signal.</DIV>
<DIV>I suppose it is confused with two tone SSB testing without a carrier since the audio levels seem the same on the display. The compressor was disabled ad Phil H. suggested. The audio generator seems to also be a bit hot. When looking at the signal on a scope the output is overmodulated in AM mode but looks ok in SSB if the drive is set back slightly.</DIV>
<DIV>(80 drive 38 dB gain on 75 meters). </DIV>
<DIV>Metis works great. Frank WA1GFZ</DIV></td></tr></table>