<html><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; "><br><div><div>On May 13, 2011, at 9:23 PM, Phil Harman wrote:</div><blockquote type="cite"><div><font class="Apple-style-span" color="#000000"><br></font>You can use V1.3 with a single Mercury board or multiple receives within the same board. If you are using multiple Mercury boards then please wait for an annoucement regarding updated Mercury code from Joe before loading V1.3.<br><br></div></blockquote></div><br><div>Actually, Metis v1.3 is compatible with the current version of PowerSDR v1.19.3.4.diversity20 (12MAY2011) and Mercury v6.4 with no changes required since only two Mercury receivers are implemented (Atlas comm line assignments were made only for Merc3 and Merc4) and the broadband spectrum feature is not used. </div><div><br></div><div>It should be noted that incompatibility arises with Metis v1.3 only if three or more Mercury boards are used simultaneously (no released program does that presently anyway) or if the broadband spectrum is used with more than a single Mercury board present. I will post a new version of Mercury firmware before long that handles three or more Mercury boards appropriately and is compatible with broadband spectrum communications when multiple Mercury boards are present. </div><div><br></div><div>Thanks, Phil!</div><div><br></div><div>73, Joe K5SO</div><div><br></div></body></html>