Thanks for getting Alex up on the order page.  I've placed my order and looking forward to completing my HPSDR system.<div><br></div><div>Just looking through the wiki and notice I will need at least 4 cables internally to connect everything. </div>
<div>  1 SPI ribbon cable to connect Mercury to Alex </div><div>  1 SPI ribbon between Alex TX and RX boards</div><div>  1 ribbon cable for forward and reverse log power output  to Mercury board</div><div>  1 short coax cable with SMB connectors</div>
<div>...is that correct?</div><div><br></div><div>I guess I need to find out what comes with the boards and what to I need to build/buy here to get ready.  </div><div>I will probably need some advice on preparing the ribbon cables if not supplied.</div>
<div><br></div><div><br></div><div>Many Thanks</div><div><br></div><div>Jim</div><div>VA3KV</div><div>Rockland, Ontario</div><div>Canada</div>