Hi Jeremy,<br><br>Thanks for clarifying this, sure we can double decker 2 ADCs.....at least they won't be lonely :)<br><br>Abhi<br><br>On Monday, August 8, 2011, Jeremy McDermond <<a href="mailto:mcdermj@xenotropic.com">mcdermj@xenotropic.com</a>> wrote:<br>
> On Aug 7, 2011, at 3:23 AM, Abhi Arunoday wrote:<br>><br>>> Hi Jeremy,<br>>><br>>> I put in the "Caveat"  as I do understand that this would be NO trivial exercise :),<br>><br>> I figured you did, but I wanted to make sure that everyone else did as well. :)  I could just see someone after Hermes is released saying that "Ahbi said that you could do it, when are you guys coming out with it!"<br>
><br>>> There would have to be a single 122.88Mhz master clock and a  10Mhz reference source driving both the cards (adding a jumper wire with 122.88Mhz @ 1.5v PP is not a good idea if you have Penelane/lope anywhere near it), there is also the issue of correctly correlating the data from the two boards as you have already pointed out, in fact the thought of adding a second ADC on Hermes did accur to me when I was working on the PCB but trust me looking at the component density and crosstalk issues I immediately discarded the notion,<br>
>><br>>> The idea of adding even one more resistor to the Hermes board for some reason does not seem to be very entertaining thought for some weird reason :)<br>><br>> Can't you just solder it directly on top of the first one? :)<br>
><br>>> Regards,<br>>><br>>> Abhi<br>><br>><br>> --<br>> Jeremy McDermond (NH6Z)<br>> Xenotropic Systems<br>> <a href="mailto:mcdermj@xenotropic.com">mcdermj@xenotropic.com</a><br>><br>
><br>><br>>