<html><head>
<link media="all" type="text/css" href="/netmail/static/deg/css/wysiwyg-3933289048.css" rel="stylesheet">
</head>
<body>
Hi Ted, et all,<br> Although I'm not running an OS10X machine, I've had success running HPSDRProgrammer and following Appendix A<br>in the Metis user guide. HPSDRProgrammer is downloadable for the MacOS here: http://openhpsdr.org/download.php.<br><br>I think that I have read that other Mac users have been successful in having it run. Sorry to hear that you're having trouble. I know exactly what it's like. There is a slight ms-guidance in Appendix A of the Metis user guide. In revision 1.2 page 16 at bottom of page, the last step is to go back to the Boot Loader Tab and then click the Program button. It took me awhile to figure that one out. Best of luck to you.<br><br>73, Bill, wf4r<br><br><br>Sep 27, 2011 09:06:13 AM, k5so@valornet.com wrote:<br><blockquote style="border-left: 3px solid rgb(102, 153, 204)">***** High Performance Software Defined Radio Discussion List *****<br><br>Hi Ted,<br><br>First, keep in mind that the dual_Mercury1 program is a modification <br>of Doug W5WC's PowerSDR v2.2.3 program.<br><br>Before running the dual Mercury program you should be able to run <br>Doug's program. If you can't do that, the dual_Mercury1 program won't <br>run either. It sounds like your problem is not with anything to do <br>with my dual_Mercury program but rather that you aren't able to run <br>the basic PowerSDR v2.2.3 program from which it derives, right?<br><br> If I correctly understand what you're saying, you are unable to run <br>ANY PowerSDR program on your XP machine with the Metis interface; thus <br>we need to get you up and running with Metis on the XP first, then the <br>problem you're having with PowerSDR v2.2.3 will likely disappear.<br><br>Perhaps one of the Metis gurus can help us get you set up with the <br>proper installations. I happen to have .NET Framework SDK v1.1 <br>installed on my machine. I don't know if you need that, in <br>particular, but I imagine that you are missing one such install or a <br>critical driver perhaps. I imagine, hearing your report, that you <br>also are not able to run HPSDRProgrammer either on your XP machine <br>with Metis, right?<br><br>Rather than me stubble around with numerous suggestions for Ted to <br>try, can anyone help us with a suggestion for Ted on getting his Metis <br>interface problem straightened out?<br><br>73, Joe K5SO<br><br><br>On Sep 27, 2011, at 1:21 AM, VE7VIB wrote:<br><br>> Hi Joe,<br>><br>> I decided to jump into diversity radio magic with the second Mercury <br>> card.<br>> I updated my Metis and Mercury boards to the latest status using Flynn<br>> program for Mac.<br>> Heterodyne works fine with one Mercury board at the time which means <br>> that<br>> programming of all cards was successful.<br>><br>> Now I installed Metis, one Mercury board on the XP machine, and I am <br>> trying<br>> to run your PowerSDR v.2.2.3. The problem is that the Metis board is <br>> not<br>> recognized in the setup since the IP address are zeros.<br>><br>> I run successfully HPSDR with the Ozy board on this XP machine in <br>> the past.<br>> What would cause Metis board not detected in your PowerSDR software?<br>><br>> 73, Ted VE7VIB<br>><br><br>_______________________________________________<br>HPSDR Discussion List<br>To post msg: hpsdr@openhpsdr.org<br>Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org<br>HPSDR web page: http://openhpsdr.org<br>Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/<br></blockquote>
</body></html>
1317180092.0