<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
After failing to get ghpsdr and ghpsdr3-alex's hpsdr-server to
recognize Metis at the other end of the Ethernet cable, I thought
I'd try QTRadio and connect to a server in the list of shared
servers. When I try to connect to any server, the GUI hangs
indefinitely. So I'm 0 for 3 in getting the Linux software to work.<br>
<br>
Hopefully someone can tell me what I'm missing.<br>
<br>
Mark - K4XML<br>
<br>
On 1/1/12 5:57 PM, Mark Leone wrote:
<blockquote cite="mid:4F00E4F3.5000609@verizon.net" type="cite">
<pre wrap="">***** High Performance Software Defined Radio Discussion List *****
</pre>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
I have the same problem running ghpsdr. I run the binary as
./ghpsdr --metis --interface eth0, and I get the same results as
with ghpsdr3-alex: it properly identifies the IP and MAC addresses
of eth0, but cannot find Metis.<br>
<br>
Mark - K4XML<br>
<br>
On 1/1/12 12:12 AM, Mark Leone wrote:
<blockquote cite="mid:4EFFEB43.3020909@verizon.net" type="cite">
<pre wrap="">***** High Performance Software Defined Radio Discussion List *****
</pre>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<meta http-equiv="content-type" content="text/html;
charset=ISO-8859-1">
I'm following the instructions in the newbie guide for
ghpsdr3-alex (on the wiki), and hpsdr-server does not find my
HPSDR. I installed the software as follows<br>
<br>
<meta http-equiv="content-type" content="text/html;
charset=ISO-8859-1">
<pre>sudo add-apt-repository ppa:andrew-montefusco/ghpsdr3
sudo apt-get update
sudo apt-get install ghpsd3
</pre>
<p>And the installation appears to be successful. But when I
type<br>
</p>
<pre>hpsdr-server --metis --interface eth0
</pre>
<p>it correctly reports eth0 IP and MAC addresses, but then
reports "Found 0 Metis cards" . The address of eth0 is
192.168.2.1, and it is directly cabled with an Ethernet cable
to Metis at IP address 192.168.2.2. My Internet connection is
on a separate interface on a different subnet. The eth0
interface is configured with subnet mask 255.255.255.0, and no
gateway is specified (if I specify 192.168.2.2 as the gateway,
the Internet connection stops working). I can connect to Metis
from the same interface when I boot the same PC as Windows and
run PowerSDR.<br>
</p>
<p>Maybe I missed something in the pre-install setup. The guide
said to copy the .hex and .rbf files currently used for HPSDR
to my home directory. However the only .hex or .rbf files in
my PowerSDR program folder are named as being for Ozy and/or
Janus, neither of which I use. Was I supposed to copy these
files anyway? Am I missing some other file? Or is my Ethernet
interface not set up properly?<br>
</p>
<p>Mark - K4XML<br>
</p>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
HPSDR Discussion List
To post msg: <a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:hpsdr@openhpsdr.org">hpsdr@openhpsdr.org</a>
Subscription help: <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org">http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org</a>
HPSDR web page: <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://openhpsdr.org">http://openhpsdr.org</a>
Archives: <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/">http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/</a>
</pre>
</blockquote>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
HPSDR Discussion List
To post msg: <a class="moz-txt-link-abbreviated" href="mailto:hpsdr@openhpsdr.org">hpsdr@openhpsdr.org</a>
Subscription help: <a class="moz-txt-link-freetext" href="http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org">http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org</a>
HPSDR web page: <a class="moz-txt-link-freetext" href="http://openhpsdr.org">http://openhpsdr.org</a>
Archives: <a class="moz-txt-link-freetext" href="http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/">http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/</a>
</pre>
</blockquote>
</body>
</html>