HPSDR,<div><br></div><div>Borrowed a Rubidium Standard from AE6PM - to calibrate Excalibur - have a few questions - </div><div><br></div><div>Is it possible the Green LED, for instance, could stay on for a shorter period of time than the Red LED if there is an issue with phase?  Or maybe duty-cycle?</div>

<div><br></div><div>I currently have Excalibur adjusted so it is about 8-seconds Green LED on; 8-seconds Red LED on - so I suppose that is good.</div><div><br></div><div>Note when I got this adjustment to work - seemed like the on-times for both LED's stabilized a bit.  (Rubidium Standard was warmed up of-course and locked.)</div>

<div><br></div><div>I then ran the 10MHz calibrate function on PowerSDR.  If the above is indeed working - then my error is 1/16 Hz - correct?</div><div><br></div><div>73's,</div><div>John</div><div>AJ6BC</div><div><br>

</div>