<html><head></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">Steve, <div><br></div><div>From your description it sounds to me that your Alex filter set is working just fine; there should be negligible insertion loss for the filters when they are automatically switched according to your operating frequency. </div><div><br></div><div>For example, if you are running PowerSDR and you have the front panel Alex control selected (Alex is also specified as being present in the Setup > Hardware Config menu) the relays/filters in Alex will change automatically when you change bands (except between bands that actually use the same filters, of course!). If the front panel Alex control is de-selected then Alex will be controlled by how you have the manual Alex control settings configured in the Setup > Alex > Filters menu. </div><div><br></div><div>For proper Alex control I recommend that you use the current firmware versions for Metis (v2.1) and Mercury (v3.3). </div><div><br></div><div>You do not need Penelope or PennyLane to operate as you desire. </div><div><br></div><div>73, Joe K5SO</div><div><br></div><div><br><div><div>On Nov 3, 2012, at 4:19 PM, Steve Mitan wrote:</div><br class="Apple-interchange-newline"><blockquote type="cite">***** High Performance Software Defined Radio Discussion List *****<br><br>
<div dir="ltr">
<div dir="ltr">
<div style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt">
<div>HI all.</div>
<div>Either Alex is not working correctly or I have no idea what I am
doing.</div>
<div> </div>
<div>I have the following boards: Mercury, Atlas, Alex and Metis. I do not have
Penelope. I bought the HPSDR for receive only.</div>
<div> </div>
<div>Mercury works fine but I am not sure if Alex is working properly. (Alex “To
Receiver” is connected to Mercury. My antenna is connected to “ANT
1”. The two Alex boards are connected internally. Preamp can be off or
on.)</div>
<div> </div>
<div>When Antenna Cltrl is not check there is no signal as if there was no
antenna connected. When the Antenna Cltrl is checked, the signal level and
noise is the same as when the antenna is connected directly to Mercury. I
can see no difference. If I check Antenna Cltrl and try different
connections to Mercury or the antenna I get either no signal or a signal equal
to the antenna connected directly to Mercury. I can hear the relay clicking when
I change the bands.</div>
<div> </div>
<div>Will Alex work only if I have Penelope? Is Alex working properly?
What am I doing wrong?</div>
<div>Thanks for any enlightenment. </div>
<div> </div>
<div>Steve</div>
<div>WB3BRG</div>
<div> </div></div></div></div>
_______________________________________________<br>HPSDR Discussion List<br>To post msg: <a href="mailto:hpsdr@openhpsdr.org">hpsdr@openhpsdr.org</a><br>Subscription help: <a href="http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org">http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org</a><br>HPSDR web page: <a href="http://openhpsdr.org">http://openhpsdr.org</a><br>Archives: <a href="http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/">http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/</a></blockquote></div><br></div></body></html>