<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.18702">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2 face=Verdana>Am running Hermes into a 100 watt PA chain with
the Alex Tx board. In Tx mode the Alex T/R relay bleeds enough RF back
into the Rx channel to generate ADC OVERLOAD messages on the console.
Going to the Alex tab and checking the ATT on Tx box fixes the problem so long
as the MOX button is used to control Tx mode. But it doesn't work when PTT
is used.</FONT></DIV>
<DIV><FONT size=2 face=Verdana></FONT> </DIV>
<DIV><FONT size=2 face=Verdana>Am running 2.0 firmware and PSDR RX2 v2.2.5 from
W5WC.</FONT></DIV>
<DIV><FONT size=2 face=Verdana></FONT> </DIV>
<DIV><FONT size=2 face=Verdana>73,</FONT></DIV>
<DIV><FONT size=2 face=Verdana>Rod, KQ6F</FONT></DIV></BODY></HTML>