<html><body><div style="color:#000; background-color:#fff; font-family:times new roman, new york, times, serif;font-size:12pt"><div style="RIGHT: auto">WOW, </div>
<div style="RIGHT: auto">It works great, cursor gives exact numbers so simple subtraction to measure IMD.</div>
<div style="RIGHT: auto">This is so cool. I'm using an old Narda 1GHz to 2GHz coupler and some pads to</div>
<div style="RIGHT: auto">reduce the level back to the RX. It just takes one additional relay to route the RX </div>
<div style="RIGHT: auto">to the coupler in TX. No additional control signals. It becomes very easy to monitor </div>
<div style="RIGHT: auto">the TX signal and see when distortion comes out of the noise floor. I just measured my</div>
<div style="RIGHT: auto">300 watt strip at -31dBc at 300W PEP. (same number on the H<VAR id=yui-ie-cursor></VAR>P141) Normal voice I had to hit it pretty hard to see </div>
<div style="RIGHT: auto">distortion. No more waiting for the old HP141 to warm up and tune to operating frequency.</div>
<div style="RIGHT: auto">Frank WA1GFZ</div></div></body></html>