<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;"><br>Actually what I would like to see is a way to specify the IP of the Metis or Hermes within PowerSDR. I have already setup each of my Metis and Hermes boards with static IPs. What I really want to do is run more than one instance of PowerSDR on a single PC and then have each respective install of PowerSDR be permanently associated with a particular Hermes or Metis. Currently there is no way to explicitly configure a PowerSDR session on the same machine to talk a specific Metis or Hermes  (easily?). And ideally with the ability to have both metis or Hermes be on the same IP subnet.<br><br>And I could see someday with even more PC horsepower wanting to run even more than 2 of the IP based HPSDR boards on the same computer, in the same subnet.<br><br>Duane<br>N9DG<br><br>--- On <b>Sat, 2/9/13, Phil Harman <i><phil@pharman.org></i></b>
 wrote:<br><blockquote style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;"><br>From: Phil Harman <phil@pharman.org><br>Subject: Re: [hpsdr] Specifying Explicit IPs for Hermes or Metis in PSDR<br>To: "Lloyd Berg - N9LB" <lloydberg@charter.net><br>Cc: hpsdr@openhpsdr.org<br>Date: Saturday, February 9, 2013, 11:39 PM<br><br><div class="plainMail">***** High Performance Software Defined Radio Discussion List *****<br><br>Hi Lloyd,<br><br>Setting a static IP address for Metis and Hermes has been available from<br>V1.0 of the FPGA code.<br><br>The next version of FPGA code for these boards will provide a simpler way<br>of setting the IP address.<br><br>See the User Guide for these boards - they explain how to currently do this.<br><br>73 Phil...VK6APH<br><br><br>> ***** High Performance Software Defined Radio Discussion List *****<br>><br>> Yes, the ability to assign individual static IP addresses is
 very<br>> important to my HPSDR plans too.<br>><br>> Hope this will be possible in the near future.<br>><br>> 73<br>><br>> Lloyd - N9LB<br>><br>> -----Original Message-----<br>> From: <a ymailto="mailto:hpsdr-bounces@lists.openhpsdr.org" href="/mc/compose?to=hpsdr-bounces@lists.openhpsdr.org">hpsdr-bounces@lists.openhpsdr.org</a><br>> [mailto:<a ymailto="mailto:hpsdr-bounces@lists.openhpsdr.org" href="/mc/compose?to=hpsdr-bounces@lists.openhpsdr.org">hpsdr-bounces@lists.openhpsdr.org</a>]On Behalf Of Duane - N9DG<br>> Sent: Saturday, February 09, 2013 3:58 PM<br>> To: <a ymailto="mailto:hpsdr@openhpsdr.org" href="/mc/compose?to=hpsdr@openhpsdr.org">hpsdr@openhpsdr.org</a><br>> Subject: [hpsdr] Specifying Explicit IPs for Hermes or Metis in PSDR<br>><br>><br>> ***** High Performance Software Defined Radio Discussion List *****<br>><br>><br>> Has there been any thought to modifying PSDR to allow
 users to explicitly<br>> specify the IP of the Hermes or Metis that it will talk to?<br>><br>> The reason I ask this I am making good head way on my “round 2 it”<br>> project of getting all my DDC/DUC HPSDR gear up and running. As part of<br>> that I'm wanting to run 2 Hermes on one computer and a Metis and Flex 5K<br>> on another. Running the 5K with either the Metis or Hermes is no sweat.<br>> What I'm trying to figure out is what is the best way to run either two<br>> Hermes or a Hermes and Metis on one PC. My original thought was to have<br>> dedicated NICs for each IP HPSDR radio, but more recently I've concluded<br>> it would be nice to run all of the IP based radios on the same IP network<br>> and with addresses all in the same IP range. So my current thinking is<br>> that it would be extremely useful to be able to attach all 3 IP radios to<br>> a single switch and then also two separate PCs to that same
 switch as<br>> well.<br>><br>> Operationally I would for much of the time be running the two Hermes on<br>> one PC that I'll call SDR1. These two Hermes will be for 50 and 144 MHz.<br>> This same machine would also run the Flex 5K and Metis/Mercury/Penelope<br>> for 222 and 432 MHz when a VHF contest is running. But during the VHF<br>> contest I would then drive the two Hermes from a second PC that I'll call<br>> SDR2 instead. Basically the flexibility I'm looking for is to be able to<br>> move the two Hermes from one machine to another easily and by just<br>> starting the two PSDR sessions on the appropriate PC as needed.<br>><br>> My thought is that if PSDR could be modified to allow explicit IPs to be<br>> specified for a particular Metis or Hermes piece of hardware. I could then<br>> have 4 installs of PSDR on one machine and 2 on the other. All of the<br>> individual PSDR installs/sessions being
 explicitly tied to a specific<br>> piece of hardware. As part of this the Hermes and Mets would each be<br>> assigned static IPs which is the only way I can see that this could work<br>> without any kind of name resolution in the Metis and Hermes hardware.<br>><br>> So just how crazy is this idea? Or how hard would it be to do?<br>><br>> 73,<br>> Duane<br>> N9DG<br>><br><br></div></blockquote></td></tr></table>