<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hello Mike,<br>
<br>
I do agree on most of your points, except for item 101. SO8N is the
correct outline for the board, so DigiKey number M25P16-VMN6TPCT-ND
is correct and column D and E of the BOM are incorrect. VMW is not
going to fit.<br>
<br>
73, Stijn<br>
<meta http-equiv="CONTENT-TYPE" content="text/html;
charset=ISO-8859-1">
<title></title>
<meta name="GENERATOR" content="LibreOffice 3.5 (Linux)">
<style>
<!--
BODY,DIV,TABLE,THEAD,TBODY,TFOOT,TR,TH,TD,P { font-family:"Calibri"; font-size:x-small }
-->
</style>
<div class="moz-cite-prefix">Op 20-02-13 16:16, Mike Collins
schreef:<br>
</div>
<blockquote cite="mid:5124E8D0.3050100@tampabay.rr.com" type="cite">
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<div class="moz-cite-prefix">On 2/20/2013 8:36 AM, Gloria Koch
wrote:<br>
</div>
<blockquote cite="mid:BAY148-W1956B5A6EA782243BFD0EE1F60@phx.gbl"
type="cite"><br>
<div dir="ltr"> <br>
On my BOM (1010_HERMES_PROD_BOM_08112012.xls) C37 is listed as
a<br>
33pf and there is only ONE instance of it. There is no C70,
C228, nor C229 on<br>
my BOM as mentioned however item 15 is a 47nf cap not 1nf on
my BOM.<br>
<br>
So I'm not sure what I need to do for the correct values of
C70, C228 and C229?<br>
<br>
10 A0010 2 08055A330JAT2A 33pf (C37,C39)
805 AVX DigiKey 478-1310-6-ND<br>
<style>
<!--
BODY,DIV,TABLE,THEAD,TBODY,TFOOT,TR,TH,TD,P { font-family:"Calibri"; font-size:x-small }
-->
</style>15 A0019 1 08055C473KAT2A 47nF C150 805
AVX DigiKey 478-1391-1-ND<br>
<br>
Also, dealing with the fuses, on my BOM F1, F2, and F3 are all
2 amp fuses, where<br>
Stijn mentions all 3 of his are different. Are the 2 amp fuses
OK to use?<br>
<br>
36 A0034 3 2A F1,F2,F3 1812 Bel Fuse
DigiKey MF-MSMF110/16-2CT-ND<br>
<br>
It appears the BOM and Schematic needs to be updated. Am I
missing any other changes?<br>
<br>
</div>
</blockquote>
Hi Rick,<br>
<br>
Not sure I see anything wrong with the Item 15, C150 line you
listed.<br>
<br>
Here is my notes (I could be wrong) on the referenced BOM:<br>
<br>
Item 9: added C70 1nF from schematic value (Abhi says it is
100nF), looks like 1nF cap on TAPR build<br>
Item 10: C37 not on board, C39 is dup item 8 on line 44<br>
Item 18: Part Number 08055C473KAT2A should be 474<br>
Item 19: Digikey part is 10V, OK for all but C194 is on 12Vbus so
need 16V or higher.<br>
Item 32: Part number RLP-50+ should be 40+<br>
Item 92: Part number CRCW080512K0FKEA should be 63.4K<br>
Item 101: Digikey M25P16-VMN6TPCT-ND should be VMW, PCB Footprint
SOIC-8 should be SO8W<br>
Item 122: Part number LT3680EDD#PBF shoud be LT3680EMSE#PBF, PCB
Footprint DFN (UPDATED) should be MSOP8<br>
<br>
Still working on my soldering of my build. Having better luck
when tinning both board and device pads for U13, 58, 10, 11, 12,
and 21.<br>
Everything else OK with handsoldering. Might need to reflow U23
again.<br>
<br>
73, Mike Collins KF4BQ<br>
<br>
<br>
<br>
<br>
</blockquote>
<br>
</body>
</html>