<br><br><div class="gmail_quote">On Fri, Mar 8, 2013 at 1:08 AM, John Sager <span dir="ltr"><<a href="mailto:john@sager.me.uk" target="_blank">john@sager.me.uk</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div class="im">***** High Performance Software Defined Radio Discussion List *****<br>
<br>
</div>Or measure the actual error in the onboard 10MHz reference. I did that using<br>
a standard frequency broadcast (RWL), and the 'fmt' program in Joe Taylor's<br>
WSPR software. Mine is about 1.5Hz high after it warms up.<br></blockquote><div><br></div><div>The built-in 10MHz reference is (if I recall properly) rated at 1ppm accuracy. So your 1.5 Hz error at 10MHz is well within spec. </div>
<div><br></div><div>But the thing I noticed about the built-in reference, at least on the Hermes board sold by Apache Labs, is that the internal temperature correction is not smooth but corrects in jumps. Phil figured that one out after I reported frequency instability. I had hoped to be able to quickly calibrate the Hermes board to WWV and then be able to do non-critical frequency measurements, i.e. under 1Hz but not quite down to 1mHz, but that appears not to be possible using the built-in reference. Of course, for people using the radio for "normal" operations, they wouldn't notice a thing. You just have to be anal-retentive like me to catch it. :-) </div>
<div><br></div><div>(And I really appreciated Phil's and the folks at Apache Labs' efforts to figure out what was going on.)</div><div><br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

<br>
73 John G8ONH<br>
<div class="HOEnZb"><div class="h5"><br>
On 08/03/13 08:06, Phil Harman wrote:<br>
> ***** High Performance Software Defined Radio Discussion List *****<br>
><br>
> Yes,  but it will be if you use an external 10MHz reference that has your<br>
> required accuracy.,<br>
><br>
> 73 Phil...VK6APH<br>
><br>
><br>
><br>
> -----Original Message----- From: Bruce Beford<br>
> Sent: Friday, March 08, 2013 10:05 AM<br>
> To: <a href="mailto:hpsdr@lists.openhpsdr.org">hpsdr@lists.openhpsdr.org</a><br>
> Subject: Re: [hpsdr] Precise receive frequency measurement<br>
><br>
> ***** High Performance Software Defined Radio Discussion List *****<br>
><br>
> Thanks, Phil.<br>
> Doesn't the overall accuracy of this formula assume that the 122.88 MHz<br>
> clock -is- in fact, exactly correct?<br>
><br>
> 73,<br>
> Bruce, N1RX<br>
><br>
>> The frequency is sent to Hermes/Mercury as a 32 bit value in Hz.  This is<br>
>> converted to a 32 bit phase word as follows:<br>
><br>
>> phase =  frequency * 2^32 / 122880000<br>
><br>
>> You will be able to calculate the actual frequency from the above.<br>
><br>
>> 73 Phil...VK6APH<br>
><br>
><br>
><br>
><br>
><br>
> _______________________________________________<br>
> HPSDR Discussion List<br>
> To post msg: <a href="mailto:hpsdr@openhpsdr.org">hpsdr@openhpsdr.org</a><br>
> Subscription help: <a href="http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org" target="_blank">http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org</a><br>
> HPSDR web page: <a href="http://openhpsdr.org" target="_blank">http://openhpsdr.org</a><br>
> Archives: <a href="http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/" target="_blank">http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/</a><br>
> _______________________________________________<br>
> HPSDR Discussion List<br>
> To post msg: <a href="mailto:hpsdr@openhpsdr.org">hpsdr@openhpsdr.org</a><br>
> Subscription help: <a href="http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org" target="_blank">http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org</a><br>
> HPSDR web page: <a href="http://openhpsdr.org" target="_blank">http://openhpsdr.org</a><br>
> Archives: <a href="http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/" target="_blank">http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/</a><br>
<br>
</div></div><span class="HOEnZb"><font color="#888888">--<br>
John Sager<br>
<br>
Computer Security Consultant<br>
<br>
Tel:    01473 736620<br>
Mobile: 07920 867261<br>
E-mail: <a href="mailto:john@sager.me.uk">john@sager.me.uk</a><br>
</font></span><div class="HOEnZb"><div class="h5">_______________________________________________<br>
HPSDR Discussion List<br>
To post msg: <a href="mailto:hpsdr@openhpsdr.org">hpsdr@openhpsdr.org</a><br>
Subscription help: <a href="http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org" target="_blank">http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org</a><br>
HPSDR web page: <a href="http://openhpsdr.org" target="_blank">http://openhpsdr.org</a><br>
Archives: <a href="http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/" target="_blank">http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/</a><br>
</div></div></blockquote></div><br><br clear="all"><div><br></div>-- <br>Brian Lloyd, WB6RQN/J79BPL<br>3191 Western Dr.<br>Cameron Park, CA 95682<br><a href="mailto:brian@lloyd.com" target="_blank">brian@lloyd.com</a><br>
+1.767.617.1365 (Dominica)<br>+1.916.877.5067 (USA)<br>