On Thu, Mar 14, 2013 at 1:52 PM, Brian Lloyd <span dir="ltr"><<a href="mailto:brian@lloyd.com" target="_blank">brian@lloyd.com</a>></span> wrote:<br><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br><br><div class="gmail_quote"><div class="im">On Thu, Mar 14, 2013 at 1:20 PM, Mike Monnier <span dir="ltr"><<a href="mailto:w8bac@comcast.net" target="_blank">w8bac@comcast.net</a>></span> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div class="im">
***** High Performance Software Defined Radio Discussion List *****<br>
<br>
<br><u></u>



</div><div style="PADDING-LEFT:10px;PADDING-RIGHT:10px;PADDING-TOP:15px" name="Compose message area">
<div><font face="Calibri"><font face="Times New Roman">My Apache Labs 
Hermes/Anan-10 has, what looks like, frequency instability or<br>drift that 
seems to be caused by temperature changes.<br></font></font></div></div></blockquote><div><br></div><div>Yes, you are right. I discovered the problem a month or so ago and worked with Phil and the folks at Apache Labs (with whom I am quite impressed and with whom I will happily continue doing business) about it. </div>

<div><br></div><div>First, yes, you will see what appears to be temperature instability on the internal 10MHz reference. If you look at the absolute numbers you will find that this "instability" is well within the 1ppm specification. The worst-case error I ever saw was just short of 2Hz at 10MHz, or 0.2ppm. Quite a bit better than spec -- but still annoying. My first inclination was the that there was a problem with the PLL that locks the 122.88 MHz clock to the 10MHz reference. That was not the case. The problem turns out to be the way that the 10MHz internal reference is temperature compensated. Apparently it is digitally compensated and therefore the corrections are quantized, hence the sudden jumps. Yes, it is annoying, especially if you are a frequency measurement geek like me. But that does not mean it doesn't meet spec or that it can't be used, even for applications like WSPR.</div>

<div><br></div><div>The other issue is the use of external reference input. </div></div></blockquote><div><br></div><div>(Sorry, I accidentally typo'd send.) </div><div><br></div><div>There was a bad value in the Schmidt-trigger squaring circuit for the 10MHz reference input. R141, the emitter resistor of the differential pair, has the wrong value. It should be 50Ω, not 100Ω. Change that an you won't have any problems with using your external reference. </div>
<div><br></div><div>The ANAN-10 is a good FMT platform with a good 10MHz external reference. I use either an LPRO-101 Rb reference or a Trimble Thunderbolt GPSDO with mine. Works like a champ.</div><div><br></div></div>-- <br>
Brian Lloyd, WB6RQN/J79BPL<br>3191 Western Dr.<br>Cameron Park, CA 95682<br><a href="mailto:brian@lloyd.com" target="_blank">brian@lloyd.com</a><br>+1.767.617.1365 (Dominica)<br>+1.916.877.5067 (USA)<br>