<div dir="ltr">I'd like to run Hermes with external 12v and external 5v supplies.<div><br></div><div>The Hermes User Manual Revision 1.16 seems to conflict itself, and I could use some clarification.</div><div><br></div>
<div>I've broken down the 'steps' found on top of page 12 of 30:</div><div><br></div><div><div><b>For operation from a 12 V DC supply <u>and an external 5 V</u> supply:</b></div><div><ul style><li style>connect the ‘positive’ lead of the 12 V supply to pin 1 of J10 and the ‘negative’ lead to pin 2 of J10. <br>
</li><li style>Connect the positive lead of the external 5 V supply to pin 4 of J10 and the negative lead connections to pin 3 of J10.</li><li style>Ensure that the jumper on J18 is removed<br></li><li style>the jumper on J17 is placed on pins 1 and 2<br>
</li><li style><b><u>a jumper placed on J21 </u></b><br></li><li style>and a jumper placed on pins 1 and 2 of J26.<br></li></ul></div><div style><b>However on page 10 of 30 the manual says of <u>Jumper J21</u>:</b></div><div>
<br></div><div>J21: When a jumper is in place (the default setting) the internal 5 V SMPSU is enabled and should be</div><div>in place when using a 13.8 V or 12 V DC supply for the overall power requirements of Hermes.</div>
<div><b><i>*** <u>The jumper should be removed</u> when an external 5 V supply is used. ***</i></b></div><div><br></div><div><br></div><div style>I'd like to hear either from someone who has run Hermes with external 5v and external 12v supplies, or someone who knows 100% for certain<b><u> how J21 should be in 12v and 5v operation.</u></b></div>
<div style><br></div>-- <br><div dir="ltr">“Real knowledge is to know the extent of one’s ignorance.”  ~Confucius (551 BC - 479 BC)<br><br>Tim R. Havens<br>ham radio callsign: NW0W<br></div>
</div></div>