<HTML><HEAD></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt">
<DIV>Hi,</DIV>
<DIV> </DIV>
<DIV>I just noticed that the level calibration in PSDR mRX is not working.</DIV>
<DIV> </DIV>
<DIV>It reports the following error:</DIV>
<DIV> </DIV>
<DIV>“Peak is less than 30dB from the noise floor. Please use a larger signal
for frequency calibration.”</DIV>
<DIV> </DIV>
<DIV>Needless to say my injected signal is well above that.</DIV>
<DIV> </DIV>
<DIV>It works fine in PSDR OpenHPSDR 2Rx v2.2.14.</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>73s</DIV>
<DIV> </DIV>
<DIV>Steve</DIV>
<DIV>G1YLB</DIV></DIV></DIV></BODY></HTML>