<div dir="ltr"><div>Hi Mike,<br><br></div>Please see below:<br><br><pre>- On all bands the powerSDR TX Meter FWD power is reading high, for example 110watts when my LP-100 indicates 100 watts.
how can I calibrate my FWD power?<br><br></pre><pre>Are you looking at PEP readings on the LP-100, have you verified this difference with another power meter?<br></pre><pre><br> - I can only get 75 watts on 15 through 10 meters.<br>
<br></pre><pre>Is this the PSDR reading or the meter reading, please try with the dummy load connected directly to the radio<br></pre><pre><br><br> - I get a ADC overload on 6 meters or it indicates a High SWR when the LP-100 indicates a SWR of 1 to 1.1.<br>
<br>please try with the dummy load connected directly to the radio, the ADC overload warning can be fixed by enabling the checkbox "ATT on TX" <br>in setup---ANT/Filters TAB, maybe we need to code a -30dB attenuator currently it brings in line a 20dB attenuator<br>
<br></pre><pre>73s,<br></pre><pre>Abhi<br></pre><pre> </pre><br></div>