<html><head></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">All, <div><br></div><div>Sorry, I mis-spoke below. </div><div><br></div><div>Of course the correction provided by Angelia_v1.8 cannot become effective until AFTER v1.8 is installed. Therefore, should a problem occur in updating to v1.8 that doesn’t mean the “fix” is ineffective. Only if there is a failure during an upload after v1.8 is installed would there be a possible indication that v1.8 may not have fixed the issue entirely. </div><div><br></div><div>73, Joe K5SO</div><div><br><div><div>On May 10, 2013, at 10:30 PM, Joe Martin K5SO wrote:</div><br class="Apple-interchange-newline"><blockquote type="cite"><span class="Apple-style-span" style="border-collapse: separate; font-family: Helvetica; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-border-horizontal-spacing: 0px; -webkit-border-vertical-spacing: 0px; -webkit-text-decorations-in-effect: none; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; font-size: medium; ">Should anyone that uses this version experience a problem during the update from which you cannot recover by using either the “normal mode” in HPSDRProgrammer or the "bootloader mode" in HPSDRProgrammer but instead finds that the only method for recovery is to use a blaster cable to reload the bootloader program into the EEPROM please let me know, as it would likely indicate that this current “fix” did not cure this intermittent/random/sporadic problem after all! <br><br>Note: If you experience a “hitch” during the update process of this firmware please power down Angelia and close HPSDRProgrammer, then bring both back up and try the update a second time in normal mode. If that does not succeed power cycle Angelia again and try to update the firmware using the bootloader mode in the HPSDRProgrammer program before resorting to using a blaster cable to re-load the “output_file.pof” into the EEPROM. <br></span></blockquote></div><br></div></body></html>