<div dir="ltr">Sorry I should have looked closer before  asking... I mounted u6 and u7 wrong... and U25.  I feel dumber than usual today.<div>The good news is the FPGA is not upside down :)<div><div class="gmail_extra"><br>

<br><div class="gmail_quote">On Sat, May 25, 2013 at 9:09 AM, k3it <span dir="ltr"><<a href="mailto:gokoyev+k3it@gmail.com" target="_blank">gokoyev+k3it@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

<div dir="ltr">Hi all<div><br></div><div>I'm going through some initial checks on the newly built Hermes and (no firmware or bootloader yet) and need some help.</div><div><br></div><div>Is it OK for the 5V output to drop down  to 4.6V under the load? I'm getting 485 mA through the J26 jumper and  good  voltages from u27-u32 regulators, but not sure if the sag is normal.  </div>


<div><br></div><div>Another problem is on the 12v rail. Connecting 2 and 3 on J17 makes the regulator too hot to touch.  There is 3.9 kOhm between J17 pin 2 and 3.    </div><div><br></div><div>Does that sound right?</div>


<div><br></div><div>73</div><div>Vasiliy K3IT</div><div><br></div><div><br></div></div>
</blockquote></div><br></div></div></div></div>