<div dir="ltr">Hi all<div><br></div><div style>I'm going through some initial checks on the newly built Hermes and (no firmware or bootloader yet) and need some help.</div><div><br></div><div>Is it OK for the 5V output to drop down  to 4.6V under the load? I'm getting 485 mA through the J26 jumper and  good  voltages from u27-u32 regulators, but not sure if the sag is normal.  </div>

<div><br></div><div style>Another problem is on the 12v rail. Connecting 2 and 3 on J17 makes the regulator too hot to touch.  There is 3.9 kOhm between J17 pin 2 and 3.    </div><div style><br></div><div style>Does that sound right?</div>

<div><br></div><div>73</div><div style>Vasiliy K3IT</div><div><br></div><div><br></div></div>