<div dir="ltr">Hi all<br><div><br></div><div>I recently finished a Hermes board and after a couple of days of AOK operation I ran into an ethernet issue. searched through the list archives and didn't find a similar problem.  </div>


<div><br></div><div>The board suddenly lost the ability to discover a DHCP address. There are no DHCP discovery requests seen in the wireshark and I was getting a fast flash on the D12.  </div><div><br></div><div>I thought may be something went wrong in the firmware and attempted to reload it using the Bootloader mode (with J12 on).  This only erased the existing firmware but failed to reprogram.</div>


<div><br></div><div>If I click the 'Read MAC' button I can see D13, D18 and D19 flash briefly but no MAC address is reported.  There is an outgoing "discovery" packet like the one below but no response packet</div>


<div><br></div><div>306<span style="white-space:pre-wrap">      </span>1311.759917000<span style="white-space:pre-wrap">  </span>Universa_a8:2e:37<span style="white-space:pre-wrap">       </span>11:22:33:44:55:66<span style="white-space:pre-wrap">       </span>0xeffe<span style="white-space:pre-wrap">  </span>62<span style="white-space:pre-wrap">      </span>Ethernet II<br>


</div><div><br></div><div>It looks like something went wrong with the Ethernet controller Transmit function, while it's able to receive packets fine.</div><div><br></div><div>(I've tried a new cable, take the switch out of the picture, a different PC, etc but it didn't help)</div>


<div><br></div><div>Any ideas what else to check? Should I look for something on the U13 pins? </div><div><br></div><div>73</div><div>Vasiliy K3IT</div></div>