<div dir="ltr">Hi John,<div><br></div><div>I am using VBCable with PowerSDR v2.2.14 for fldigi and WSPR under Win 7 64-bit. </div><div><br></div><div>Initially everything worked. However, after making a number of configuration changes, for WSPR the audio was no longer modulating the signal on transmit, although PTT was working. Fldigi continued to transmit just fine. </div>
<div><br></div><div>I discovered a bug in WSPR that caused the problem. When audio devices are reconfigured in Win 7, such as changing the default device in windows, the numbering scheme for audio devices changes in WSPR, however, the audio devices in use that are displayed in the WSPR setup station parameters menu are not updated. To select the correct audio input/output devices, open the drop down menus for Audio In and Audio Out in WSPR and select the new correct device number. Now I'm back to transmitting.</div>
<div><br></div><div style>You also have to pay attention to which devices are set as default and which are muted in the audio setup.</div><div><br></div><div>It is likely that JT65 has a similar problem. Hope this helps.</div>
<div><br></div><div>73</div><div>Ron NR5ON</div><div><br><div class="gmail_extra"><br><br><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Date: Thu, 18 Jul 2013 19:27:32 -0500<br>

From: John <<a href="mailto:radio@mediacombb.net">radio@mediacombb.net</a>><br>
To: <a href="mailto:hpsdr@openhpsdr.org">hpsdr@openhpsdr.org</a><br>
Subject: [hpsdr] Win 7 64bit and VAC???<br>
Message-ID: <<a href="mailto:51E887F4.6010405@mediacombb.net">51E887F4.6010405@mediacombb.net</a>><br>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed<br>
<br>
Hello,<br>
<br>
After much trying I was able to get my Hermes/JT65-HF  running with<br>
Windows XP with VAC last winter.   My PC was too slow to run JT65 so the<br>
decodes were usually about 10-15 seconds too late.<br>
<br>
Now I'm putting together a Windows 7 Pro 64 bit PC and trying to get it<br>
running with VAC on my Hermes.  I have set up two cables to hook Hermes<br>
to JT65-HF, but it seems to me Windows keeps changing my set ups.<br>
At one point I was able to receive and decode OK, but no audio to<br>
transmit.  Somehow I have even lost that.<br>
<br>
Does anyone have experience with Win7 64bit hooked to JT65-HF with VAC?<br>
<br>
One problem area seems to be the settings of the sound devices in Windows.<br>
<br>
73,<br>
<br>
John   WoGN<br><br></blockquote></div></div></div></div>