<div dir="ltr">Hi all,<div>I have got my Munin kit assembled and started testing it yesterday. Initially everything looked fine (160-40m) with the expected output power of around 100W, then as I increased frequency the output started to reduce with only about 50W out on 10m. I then tried 6m and thats when the smoke come out of C27. </div>
<div><br></div><div>Any ideas as to what the problem is?<br></div><div>Im going with either my dummy load isn't 50ohm over 0-MHz (its a homebrew one) or I have not correctly assembled the output transformer.</div><div>
<br></div><div>73, Byron ZL3DXT</div></div>