<br />   Anupam, I guess you are going in wrong way. You stated about 12V PS, but there should be, or clear 13.8V, or 12 and 5V separately. And CAREFULLY check jumper positions against manual. I guess, I checked it 10 times, before fire up :-) And voltage pins as well. I used old PC ATX PS, floppy drive connector went in place on Hermes almost good. But I do not remember about pins, was they correct or not. That's not a problem to exchange them.<br /><br />                                                                                                                                                                   Aivars.


 1383714854.0