<div dir="ltr">Several of the things I like to do involve precise frequency measurement in the HF spectrum using a Hermes and/or Angelia board, and PowerSDRmrx. Since my frequency reference is either a GPSDO or an Rb reference, the potential accuracy is very high. The actual limit has become the error in radix conversion between the decimal frequency value and the binary frequency control word used by the NCO in the Hermes/Angelia FPGA "firmware" plus the error in PowerSDR's NCO frequency control word. <div>
<br></div><div>Now this error is not large, typically on the order of 20 or so mHz most of the time, but there are some combinations of control words that produce larger errors.</div><div><br></div><div>Now these errors are completely deterministic. When one enters a frequency in decimal that produces a binary control word for the nearest possible frequency, usually within a couple of handsful of mHz. But if you know the binary control word, it is possible to work that backwards to the ACTUAL frequency. So, yes, if I enter 7,150,000.000 Hz, I really DO want to know that the radio actually tuned to 7,150,000.037 Hz. </div>
<div><br></div><div>What would be nice would be to have PowerSDR actually include this calculation and display it, or, better yet, include it as the actual value represented when queried with CAT. Still, just knowing the calculation so I can do my own corrections by hand would be extremely useful. </div>
<div><br></div><div>Thanks in advance.</div><div><br></div>-- <br>Brian Lloyd, WB6RQN/J79BPL<br>706 Flightline Drive<div>Spring Branch, TX 78070<br><a href="mailto:brian@lloyd.com" target="_blank">brian@lloyd.com</a><br><span><span id="gc-number-9" class="" title="Call with Google Voice">+1.916.877.5067</span> (USA)</span></div>


</div>