<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><pre>Sid,<br><br>It looks like you have direct-mode enabled which I <br>assume you have modified your RTL dongle. <br><br>In that case you don't want the offset freq which<br>you have set to 120000000 hz, change that to 0<br><br><br><br>======================================================<br><br>I'll check again tomorrow, perhaps I need an HF antenna connected. There
is a strong local ham on 7.190 but I can't hear him with the 2m/70cms
co-linear and cuSDR64.
direct_mode 1,2 in XXX.conf
slipstream:/usr/src/rtl_hpsdr # ./rtl_hpsdr -c XXX.conf
Parsing config file XXX.conf
Found 1 RTL device(s), using 1.
RTL base sample rate: 1536000 hz
Global settings:
config file: XXX.conf
network device: br0
length of fir: 32
number of rcvrs: 1
hpsdr output rate: 48000 hz
sound device: plughw:0,0
Opening device plughw:0,0 ... success.
Rcvr 1 settings...
freq offset 120000000 hz
signal multiplier 100
Found Elonics E4000 tuner
tuner gain auto
Enabled direct sampling mode, input 1
direct sampling on
agc mode off
Revealing myself as a Hermes rcvr.
br0 IP Address: 192.168.10.2
br0 MAC Address: 50:e5:49:c8:26:e7
Waiting to be discovered...
Was discovered by 192.168.10.2
Sent discovery acknowledgement.
Received freq 3701000 hz, with offset 123701000 hz, on rcvr 1
Received Start command
Received Stop command
Received Start command
Setting hpsdr output rate to 192000 hz
Received freq 3601000 hz, with offset 123601000 hz, on rcvr 1
Received freq 3501000 hz, with offset 123501000 hz, on rcvr 1
Received freq 7001000 hz, with offset 127001000 hz, on rcvr 1
Received freq 7101000 hz, with offset 127101000 hz, on rcvr 1
Received freq 7201000 hz, with offset 127201000 hz, on rcvr 1
Received freq 7101000 hz, with offset 127101000 hz, on rcvr 1
Received freq 7201000 hz, with offset 127201000 hz, on rcvr 1
Received freq 7101000 hz, with offset 127101000 hz, on rcvr 1
Received Stop command
No hpsdr packets sent for 1 second, restarting...
Setting hpsdr output rate to 48000 hz
Revealing myself as a Hermes rcvr.
br0 IP Address: 192.168.10.2
br0 MAC Address: 50:e5:49:c8:26:e7
73 ... Sid.</pre> </div></body>
</html>