<div dir="ltr"><br><div class="gmail_extra"><br><br><div class="gmail_quote">On Sun, Feb 9, 2014 at 9:00 PM, Joe Martin K5SO <span dir="ltr"><<a href="mailto:k5so@valornet.com" target="_blank">k5so@valornet.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div style="word-wrap:break-word">Brian, <div><br></div><div>I have confirmed that multiple filter are not being inadvertently put in parallel on Tx in the ANAN-100D using Angelia_test_v3.9.  </div>
<div><br></div><div>I ripped open the 100D, fabricated a 7-LED display module, and connected it to the relays of the LPFs, and verified directly using Angelia_test_v3.9 that we do not have two LPFs inadvertently switched in parallel on any band selection.  The filter switching is performing exactly as it is designed to do.  I don’t have an explanation for you for your observed “bump” in the gain settings you mention but I take it that the slight deviation from your previous observations is not a serious problem for you.  </div>
</div></blockquote><div><br></div><div>No, not a problem. A little ripple in the frequency response of the amp just adds flavor. :-)</div><div><br></div><div>And it was a WAG anyway. :-)</div><div> </div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div style="word-wrap:break-word"><div><br></div><div>By the way, the components in the Tx filters of the ANAN-100D appear to me to be identical to those in the Alex LPF board.  Thus those filters are low pass filters, not band pass filters, regardless of the fact that the control lines for the relays there are labeled “BPFn” on the PA schematic.  They probably should’ve been labeled “LPFn” instead, but that’s nit and does not affect operation of course. </div>
</div></blockquote><div><br></div><div>And, yes, I should have known better. </div><div> </div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div style="word-wrap:break-word">
<div><br></div><div>Now I have to see if I can put this thing back together, hihi!  </div></div></blockquote><div><br></div><div>Oh, leave the new instrumentation in place! It isn't real unless it has blinking lights!</div>
<div><br></div></div>-- <br><div dir="ltr">Brian Lloyd, WB6RQN/J79BPL      <img src="http://www.catb.org/hacker-emblem/glider.png"><br>706 Flightline Drive<br>Spring Branch, TX 78070<br><a href="mailto:brian@lloyd.com" target="_blank">brian@lloyd.com</a><br>
<span><span id="gc-number-4" class="gc-cs-link" title="Call with Google Voice">+1.916.877.5067</span></span></div>
</div></div>