<div dir="ltr">Hi Phil, All,<div><br></div><div>just a short comment here:</div><div class="gmail_extra"><br clear="all"><div><br></div><div class="gmail_quote">On Tue, Mar 4, 2014 at 2:05 PM, Phil Harman <span dir="ltr"><<a href="mailto:phil@pharman.org" target="_blank">phil@pharman.org</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="">***** High Performance Software Defined Radio Discussion List *****<br>
<br></div>
Doug,<br>
<br>
I've checked the Metis code and it does have the wideband data on/off command included exactly the same as implemented in Hermes.<br>
<br>
However,  checking with Wireshark I see  packets with the ("\xef\xfe\x01\x04") header and full of zeros.<br>
<br>
It's late here so only time for a quick look over the code but on the face of it I can't see the reason why the on/off command is not working.<br>
<br>
I'll investigate further.<br></blockquote><div><br></div><div>I did not see that either, but may take a look at this issue in short!</div><div> </div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

<br>
In fact this can be a nuance since a crash of the PC code generally requires a power cycle of the FPGA in order to stop it sending data and the PC to run Discovery correctly.<br></blockquote><div><br></div><div>Since it is hard to avoid any crashes during code development, I decided to implement something that you don't need to power cycle the hardware. This is also present in the latest cuSDR version: just try to connect again, and after two or three times hitting 'Start' the hardware should recognize it (tested with Mercury/Hermes/Angelia) and will work again without power cycling. It saved me a lot of getting up from my chair to recycle power...</div>

<div><br></div><div>73, Hermann</div><div>DL3HVH</div></div></div></div>