<HTML><HEAD></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000">
<DIV>Hi Everyone</DIV>
<DIV> </DIV>
<DIV>I am trying to update my Mercury receiver and I am have difficulties, here
is the process I am trying</DIV>
<DIV> </DIV>
<DIV>1. Install the bootloader jumper on the Metis board</DIV>
<DIV>2. Install the JTAG jumper JP7 on the Mercury PCB</DIV>
<DIV>3. Run the HPSDR Bootloader version 2.0 and interrogate and the board is
detected</DIV>
<DIV>4. I select the latest version of the flash code Mercury_EU_V3.4.rbf and
program</DIV>
<DIV>5. The upload goes great and when it gets to 100% it says complete</DIV>
<DIV>6. Then I see erasing flash after several minutes I get a time out
failure</DIV>
<DIV> </DIV>
<DIV>Any idea what I am doing wrong?</DIV>
<DIV> </DIV>
<DIV>The board now appears dead as PowerSDR finds the Metis PCB but says the
Mercury board has version 0.0 installed and LEDs D7 and D8 are off.</DIV>
<DIV> </DIV>
<DIV>Any help would be greatly appreciated.</DIV>
<DIV> </DIV>
<DIV>Thanks</DIV>
<DIV>Randy</DIV>
<DIV>KB4CTS</DIV></DIV></DIV></BODY></HTML>